austin

The ClojureScript browser-repl, rebuilt stronger, faster, easier.

License	License Eclipse Public License
GroupId	GroupId com.cemerick
ArtifactId	ArtifactId austin
Last Version	Last Version 0.1.1
Release Date	Release Date Aug 27, 2013
Type	Type jar
Description	Description austin The ClojureScript browser-repl, rebuilt stronger, faster, easier.
Project URL	Project URL http://github.com/cemerick/austin
Source Code Management	Source Code Management https://github.com/cemerick/austin

Download austin

Filename	Size
austin-0.1.1.pom
austin-0.1.1.jar	15 KB
Browse

How to add to project

Apache Maven

<!-- https://jarcasting.com/artifacts/com.cemerick/austin/ -->
<dependency>
    <groupId>com.cemerick</groupId>
    <artifactId>austin</artifactId>
    <version>0.1.1</version>
</dependency>

Gradle Groovy

// https://jarcasting.com/artifacts/com.cemerick/austin/
implementation 'com.cemerick:austin:0.1.1'

Gradle Kotlin

// https://jarcasting.com/artifacts/com.cemerick/austin/
implementation ("com.cemerick:austin:0.1.1")

Apache Buildr

'com.cemerick:austin:jar:0.1.1'

Apache Ivy

<dependency org="com.cemerick" name="austin" rev="0.1.1">
  <artifact name="austin" type="jar" />
</dependency>

Groovy Grape

@Grapes(
@Grab(group='com.cemerick', module='austin', version='0.1.1')
)

Scala SBT

libraryDependencies += "com.cemerick" % "austin" % "0.1.1"

Leiningen

[com.cemerick/austin "0.1.1"]

Dependencies

compile (3)

Group / Artifact	Type	Version
org.clojure : clojure	jar	1.5.1
org.clojure : clojurescript	jar	0.0-1847
com.cemerick : piggieback	jar	0.1.0

test (2)

Group / Artifact	Type	Version
org.clojure : tools.nrepl	jar	0.2.3
clojure-complete » clojure-complete	jar	0.2.3

Project Modules

There are no modules declared in this project.

Austin

A significant refactoring of the ClojureScript-standard browser-repl environment that's as easy to "configure" and use as a Clojure REPL.

Why?

Austin has one objective: to get you into a fast ClojureScript REPL suited for your project running in a browser environment as quickly and painlessly as possible, with full support for the nREPL toolchain.

Check out the screencast demonstrating how Austin is used, or forge ahead for detailed documentation.

Status

I've been using this browser-repl alternative for more than a year with good results, and others have banged it around some as well. That said, I've only recently begun to think about the API around its configuration and project integration (in particular, the cemerick.austin.repls namespace). It all works nice, but changes in that department are almost surely going to happen.

Compatibility

When using Austin via nREPL, it depends upon Piggieback. Please refer to Piggieback's compatibility notes to see if there are any known problems with using it (and therefore Austin) with your preferred toolchain.

Changelog

Available here.

Austin is largely a refactoring of the original ClojureScript REPL. These changes include:

Multiple concurrent browser-REPLs can be safely used from the same project
Austin's HTTP server is now always-on, and auto-selects an open port; this means you can have multiple concurrent browser-REPLs running from different projects without faffing around with :port arguments, etc.
Each browser-REPL session supports a new top-level "entry" URL that can be used to easily start the REPL in a browser or other JS runtime (i.e. you don't need to have a separate webapp running to initiate the browser-REPL connection)
The entry (and REPL) URLs are available in slots on the browser-REPL's environment, making it trivial to automate browser-REPL sessions with e.g. phantomjs. See 'Project REPLs' for easy-mode "project" REPLs.
Replaced the custom HTTP server with com.sun.net.httpserver.* bits (a standard part of J2SE 6+)
The :port argument to repl-env is no longer supported; the lifecycle of the server is not tied to the creation of a browser-REPL environment. If you need to get the port of the running browser-REPL server, use (get-browser-repl-port); if you need a URL you can use with clojure.browser.repl/connect as shown in existing browser-REPL tutorials, it's available under :repl-url from the browser-REPL environment you want to connect to. See 'Browser-connected REPLs' for easy-mode browser-connected REPLs

"Installation"

Austin is available in Maven Central. Add it to your project.clj's list of :plugins, probably in your :dev profile:

:profiles {:dev {:plugins [[com.cemerick/austin "0.1.6"]]}}

Also, just like in Clojure development, your ClojureScript source roots must be listed in e.g. :source-paths and/or :test-source-paths in order for ClojureScript source files to be picked up properly. i.e. just having them enumerated in your lein-cljsbuild configuration(s) is not sufficient.

Note that Austin requires ClojureScript 0.0-2665 or higher.

Austin contains some Leiningen middleware that does the following:

Adds a dependency on Austin to your project, which transitively brings in ClojureScript and Piggieback.
Modifies your project's :repl-options to include Piggieback's wrap-cljs-repl middleware.
Adds (require '[cemerick.austin.repls :refer (exec) :rename {exec austin-exec}]) to your project's :injections, thus making cemerick.austin.repls/exec available as austin-exec in the user namespace for your fast'n'easy ClojureScript browser REPL pleasure.

Usage

If you're impatient, skip on down to start a ClojureScript REPL using phantomjs/slimerjs/Chrome/etc in about 10 seconds.

Austin provides two types of ClojureScript REPL environments. One, returned by calls to cemerick.austin/repl-env, is analogous to the standard ClojureScript browser-REPL environment implemented in cljs.repl.browser, with various usability improvements. The other, returned by calls to cemerick.austin/exec-env, provides all the same functionality as repl-env, but also fully manages the lifecycle of an external JavaScript runtime that is used to service all REPL interactions (i.e. you don't need to have an app running in a GUI browser to get a browser-REPL going). Either of these REPL environments can be used with either of:

cljs.repl/repl, described in the various "core" ClojureScript tutorials as the primary entry point for all things REPL. This is suitable in terminal settings, can be used w/ e.g. inferior-lisp in emacs, and so on, but cannot be used with nREPL.
cemerick.piggieback/cljs-repl, the nREPL-compatible analogue to cljs.repl/repl, provided by Piggieback

Austin's two types of REPL environments roughly correspond to the two primary scenarios for ClojureScript REPLs:

Project REPLs, where you want a ClojureScript REPL that has all of your project's dependencies, sources, and other resources available, but is generally not using or requiring your application's front-end to be running in a GUI browser, i.e. a headless JavaScript runtime is sufficient, which may or may not have a DOM. This is generally when exec-env is used.
Browser-connected REPLs, the original use case of ClojureScript browser-REPLs, where you want a ClojureScript REPL connected to a browser runtime within which you've loaded your front-end application.

This nomenclature is a bit hand-wavy, since the JavaScript runtimes used by project REPLs are almost always also browsers; hopefully I'll come up with a better term for the first category eventually.

Project REPLs

To start a project REPL, just pass the result of calling exec-env to the ClojureScript REPL function that corresponds with your environment:

If you're using nREPL, (cemerick.piggieback/cljs-repl :repl-env (cemerick.austin/exec-env))
If you're not using nREPL, (cljs.repl/repl (cemerick.austin/exec-env))

Alternatively, you can use cemerick.austin.repls/cljs-repl, a convenience function that will detect whether you're using nREPL or not, and pass a new exec environment to the correct ClojureScript REPL function. So, (cemerick.austin.repls/cljs-repl (cemerick.austin/exec-env)) is equivalent to the two examples above; this particular combination is so commonly used that it's wrapped up into a single function, (cemerick.austin.repls/exec), probably the easiest way to start a ClojureScript REPL that uses a browser JavaScript runtime. Note that cemerick.austin.repls/exec passes all of its arguments along to exec-env.

`exec-env`'s browser runtimes

Any of the above options will give you a headless ClojureScript REPL that has all of your project's dependencies, sources, and other resources available. exec-env uses phantomjs by default, so you'll need to have that installed and on your PATH. If you are using a different phantomjs-compatible headless browser implementation (e.g. slimerjs, or perhaps your package manager installs phantomjs with a different name?), you can pass the name of that binary as :phantom-cmd, e.g. (exec-env :phantom-cmd "slimerjs").

Whichever process is started will be automatically terminated when you stop the ClojureScript REPL (via :cljs/quit), or the parent Clojure REPL.

Using other browser runtimes

I've been saying "headless" here because it's often most convenient to avoid using "headed" browsers, which necessarily open a new window for each ClojureScript REPL you start. But, if you really want to, you can use a full GUI browser with exec-env, which can be handy if you need to see the results of DOM manipulations, etc., without having to set up and connect to a browser running your application. To do this, just pass the terminal commands necessary to start your preferred browser (such that Austin can append the browser-repl URL to the command) to exec-env or exec as a :exec-cmds vector keyword argument:

user=> (cemerick.austin.repls/exec
         :exec-cmds ["open" "-ga" "/Applications/Google Chrome.app"])
Browser-REPL ready @ http://localhost:59423/4877/repl/start
Type `:cljs/quit` to stop the ClojureScript REPL
nil
cljs.user=> (apply + (js/Array 1 2 3))
6

The command strings passed to exec in this example will open the browser-REPL endpoint URL in a new Chrome window in the background on Mac OS X. Substitute whatever invocation you like for your preferred browser / operating system.

Browser-connected REPLs

This was always the primary use case for the original browser-repl: load your application up in a browser, have it connect back to your Clojure / ClojureScript compiler environment, and you can develop/debug/inspect/etc your running ClojureScript application as it runs in its target environment.

This repo provides a completely self-contained sample project demonstrating and documenting how to use Austin for your browser-connected REPL'ing needs. Check it out.

Other usage tidbits

Server port selection

By default, Austin's embedded HTTP server (which is what accepts requests from all JavaScript runtimes hosting a ClojureScript REPL) starts on a random system-assigned port. If you're using the provided facilities for generating Javascript to insert into your app's HTML to connect back to the HTTP server (i.e. cemerick.austin.repls/browser-connected-repl-js), then this is ideal: the server will always find an open port, and running multiple applications, each with N browser-REPLs, will always work.

However, if you need to fix the port used by the HTTP server, there are three ways to go about it:

set the AUSTIN_DEFAULT_SERVER_PORT environment variable before starting your Clojure process
set the cemerick.austin.default-server-port system property; this will only take effect if you have not yet caused the server to start automatically by creating a browser-REPL environment.
explicitly start Austin's server, providing the desired port number, e.g. (cemerick.austin/start-server 9000).

TODO

ISO a reasonable automated test strategy

Need Help?

Ping cemerick on freenode irc or twitter if you have questions or would like to contribute.

License and credits

Big shout out to Brenton Ashworth, Alex Redington, and Bobby Calderwood (the authors of the original browser-repl), Brandon Bloom for pushing hard on making ClojureScript easier to use, and everyone else in #clojure and on the mailing list(s) that took the time to take Austin for a spin when it was still just a gist and then a .patch file.

Portions copyright (c) Rich Hickey. All rights reserved. The use and
distribution terms for this software are covered by the Eclipse
Public License 1.0 (http://opensource.org/licenses/eclipse-1.0.php)
which can be found in the file epl-v10.html at the root of this
distribution. By using this software in any fashion, you are
agreeing to be bound by the terms of this license. You must
not remove this notice, or any other, from this software.

Versions

Version
0.1.1 Aug 27, 2013
0.1.0 Aug 5, 2013