JarCasting
spring-boot-security-saml
This project targets a smooth integration between spring-security-saml and Spring Boot by exposing a set of configurer adapters while dealing with the nitty-gritty and boiler plate of spring-security-saml configuration internally.
Works with
- Spring Boot 1.4.0+
- Spring Boot 1.5.0+
- Spring Boot 2.0.0+
Quickstart
-
Add the following maven dependency to your project:
<dependency> <groupId>com.github.ulisesbocchio</groupId> <artifactId>spring-boot-security-saml</artifactId> <version>1.17</version> </dependency>
-
Add the
@EnableSAMLSSOannotation to your Spring Boot Application on any@Configurationclass:@SpringBootApplication @EnableSAMLSSO public class ServiceProviderApplication { ... }
-
Start configuring your SAML 2.0 Service provider (see below).
Configure your SAML 2.0 Service Provider
For those familiar with spring-security-saml this plugin exposes most of it configuration points through 2 different forms that are fully interchangeable and combine-able except when providing custom implementations and instances. The two configuration flavors are:
Java DSL
Using ServiceProviderConfigurerAdapter
Configuring your Service Provider through the JAVA DSL is pretty straight forward, and it follows the configurer/adapter/builder style that Spring Security currently has. A specific Interface and Adapter class are provided for the configuration, these are: ServiceProviderConfigurer and ServiceProviderConfigurerAdapter respectively. In most scenarios, you should be good with simply extending ServiceProviderConfigurerAdapter and overriding the #configure(ServiceProviderBuilder serviceProvider) method. This is an example:
@Configuration
public static class MyServiceProviderConfig extends ServiceProviderConfigurerAdapter {
@Override
public void configure(ServiceProviderBuilder serviceProvider) throws Exception {
// @formatter:off
serviceProvider
.metadataGenerator() //(1)
.entityId("localhost-demo")
.and()
.sso() //(2)
.defaultSuccessURL("/home")
.idpSelectionPageURL("/idpselection")
.and()
.logout() //(3)
.defaultTargetURL("/")
.and()
.metadataManager() //(4)
.metadataLocations("classpath:/idp-ssocircle.xml")
.refreshCheckInterval(0)
.and()
.extendedMetadata() //(5)
.idpDiscoveryEnabled(true)
.and()
.keyManager() //(6)
.privateKeyDERLocation("classpath:/localhost.key.der")
.publicKeyPEMLocation("classpath:/localhost.cert");
// @formatter:on
}
}
It is not strictly necessary for this class to be a @Configuration class, it could also be a Spring Bean. As far as it is exposed in the Application Context, the plugin will pick it up and configure the Service Provider accordingly. The other two methods in the Configurer/Adapter, #configure(HttpSecurity http) and #configure(WebSecurity web) allow for in-place customization of Spring Security's HttpSecurity and WebSecurity objects, without requiring extending other configurers/adapters to be implemented/extended, basically a shortcut. In the above example, you can see how the following items are specified:
- The Service Provider entity ID
- The default success URL (redirect after successful login through the IDP if not saved request present) and a custom IDP Selection page URL for selecting and Identity Provider before login.
- The default logout URL, basically the URL to be redirected after successful logout.
- The IDP metadata to be used to send requests to the IDP and validate incoming calls from the IDP, and metadata reflesh interval (0 means never).
- Enable IDP discovery, so when SAML SSO kicks in, we'll be presented with an IDP selection page before the actual login, (set to false to use default IDP).
- And we provide a custom private key (DER format) and public cert (PEM format) to be used for signing outgoing requests. (To be configured in the IDP side also).
This configuration is equivalent to the one showcased in the Configuration Properties section. For more documentation and available options, please see the JavaDoc of ServiceProviderBuilder and read the Configuration Cookbook.
Using WebSecurityConfigurerAdapter
To accomplish the same configuration as above you can also use the regular Spring Security WebSecurityConfigurerAdapter to configure SAML authentication for your application in conjunction with any other security configuration your application may need. For this, besides creating your regular WebSecurityConfigurerAdapter configuration, you'll also need a bean of type SAMLConfigurerBean that you'll be able to plug into your WebSecurityConfigurerAdapter. The following is an example that showcases the exact same configuration from the previous section:
@Configuration
public static class MyServiceProviderConfig extends WebSecurityConfigurerAdapter {
@Bean
SAMLConfigurerBean saml() {
return new SAMLConfigurerBean();
}
@Bean
public AuthenticationManager authenticationManagerBean() throws Exception {
return super.authenticationManagerBean();
}
//Needed in some cases to prevent infinite loop
@Override
protected void configure(final AuthenticationManagerBuilder auth) throws Exception {
auth.parentAuthenticationManager(null);
}
@Override
public void configure(HttpSecurity http) throws Exception {
// @formatter:off
http.httpBasic()
.disable()
.csrf()
.disable()
.anonymous()
.and()
.apply(saml())
.serviceProvider()
.metadataGenerator() //(1)
.entityId("localhost-demo")
.and()
.sso() //(2)
.defaultSuccessURL("/home")
.idpSelectionPageURL("/idpselection")
.and()
.logout() //(3)
.defaultTargetURL("/")
.and()
.metadataManager() //(4)
.metadataLocations("classpath:/idp-ssocircle.xml")
.refreshCheckInterval(0)
.and()
.extendedMetadata() //(5)
.idpDiscoveryEnabled(true)
.and()
.keyManager() //(6)
.privateKeyDERLocation("classpath:/localhost.key.der")
.publicKeyPEMLocation("classpath:/localhost.cert")
.http()
.authorizeRequests()
.requestMatchers(saml().endpointsMatcher())
.permitAll()
.and()
.authorizeRequests()
.anyRequest()
.authenticated();
// @formatter:on
}
}
This is basically a manual configuration of Spring Security on which the SAMLConfigurerBean bean is defined and used as argument to HttpSecurity.apply() which registers the configurer and returns ServiceProviderBuilder for further customization. The ServiceProviderBuilder returned is the same type used in the previous example on the ServiceProviderConfigurerAdapter.configure method. After the ServiceProviderBuilder is used, an http() method exists to go back the the HttpSecurity configuration. In the example, the lines:
http() // or just http
.authorizeRequests()
.requestMatchers(saml().endpointsMatcher())
.permitAll()
Are required to expose the SAML Service Provider endpoints. The endpointsMatcher() method returns a RequestMatcher that matches only the SAML endpoints and will match any default or customized URLs without you having to specify them twice.
Configuration Properties
Configuring your Service Provider through configuration properties is pretty straight forward and most configurations could be accomplished this way. The two limitations that exists are: You can only configure what is exposed as properties, obviously, and you cannot provide specific implementations or instances of the different Spring Security SAML classes/interfaces. If you need to provide custom implementations of certain types or a more dynamic configuration you'll need to use the Java DSL approach for that configuration, but as expressed before, you can configure as much as you can through properties, while using the DSL configuration for any dynamic or custom implementations configuration. You can mix the two flavors.
For a full list of all configuration properties available see this document. Not included here to avoid clutter.
The following properties snippet is a sample configuration through application.yml.
saml:
sso:
default-success-url: /home #(1)
idp-selection-page-url: /idpSelection #(2)
metadata-generator:
entity-id: localhost-demo #(3)
logout:
default-target-url: / #(4)
idp:
metadata-location: classpath:/idp-ssocircle.xml #(5)
metadata-manager:
refresh-check-interval: 0 #(6)
extended-metadata:
idp-discovery-enabled: true #(7)
key-manager:
private-key-der-location: classpath:/localhost.key.der #(8)
public-key-pem-location: classpath:/localhost.cert #(9)
In the above example, you can see how the following items are specified:
- The default success URL (redirect after successful login through the IDP if not saved request present) and
- A custom IDP Selection page URL for selecting and Identity Provider before login.
- The Service Provider entity ID
- The default logout URL, basically the URL to be redirected after successful logout.
- The IDP metadata to be used to send requests to the IDP and validate incoming calls from the IDP,
- And metadata reflesh interval (0 means never).
- Enable IDP discovery, so when SAML SSO kicks in, we'll be presented with an IDP selection page before the actual login, (set to false to use default IDP).
- Provide a custom private key (DER format)
- And public cert (PEM format) to be used for signing outgoing requests. (To be configured in the IDP side also).
All you need on the Java side is the @EnableSAMLSSO annotation for the default configuration, although if you wanna define a ServiceProviderConfigurerAdapter that's fine too, and you can select which configuration you keep on the DSL side and what you leave on the properties, it's up to you.
If what you need is to use a standard WebSecurityConfigurerAdapter to configure SAML and you would like to use properties also, you can do that too. Using the above properties all you need to do is to apply the SAMLConfigurerBean to the HttpSecurity and disable security for the SAML endpoints:
@Configuration
public static class MyServiceProviderConfig extends WebSecurityConfigurerAdapter {
@Bean
SAMLConfigurerBean saml() {
return new SAMLConfigurerBean();
}
@Bean
public AuthenticationManager authenticationManagerBean() throws Exception {
return super.authenticationManagerBean();
}
@Override
public void configure(HttpSecurity http) throws Exception {
// @formatter:off
http.httpBasic()
.disable()
.csrf()
.disable()
.anonymous()
.and()
.apply(saml())
.http()
.authorizeRequests()
.requestMatchers(saml().endpointsMatcher())
.permitAll()
.and()
.authorizeRequests()
.anyRequest()
.authenticated();
// @formatter:on
}
}
For a more thorough description of the properties please see JavaDoc of class SAMLSSOProperties and ServiceProviderBuilder. For configuration examples, see Configuration Cookbook.
Overridable Beans
The Following Bean classes can be overridden when using this plugin. All you gotta do is add a Bean declaration anywhere in your Spring Configuration:
| Class Name | DSL Version |
|---|---|
| ExtendedMetadata | --- |
| SAMLContextProvider | DSLSAMLContextProviderImpl |
| SAMLContextProviderLB | DSLSAMLContextProviderLB |
| KeyManager | --- |
| MetadataManager | DSLMetadataManager |
| MetadataGenerator | DSLMetadataGenerator |
| SAMLProcessor | --- |
| WebSSOProfileConsumer | DSLWebSSOProfileConsumerImpl |
| WebSSOProfileConsumerHoKImpl | DSLWebSSOProfileConsumerHoKImpl |
| WebSSOProfile | DSLWebSSOProfileImpl |
| WebSSOProfileECPImpl | DSLWebSSOProfileECPImpl |
| WebSSOProfileHoKImpl | DSLWebSSOProfileHoKImpl |
| SingleLogoutProfile | DSLSingleLogoutProfileImpl |
| SAMLAuthenticationProvider | DSLSAMLAuthenticationProvider |
| SAMLBootstrap | --- |
| ParserPool | --- |
| SAMLLogger | --- |
Due to the fact that MOST spring-security-saml Bean classes use @Autowire to inject dependencies, the second column shows a DSL version of the same type with @Autowire turned off that you can use and populate, or implement your own. The ones that don't have a DSL version is because they don't need one. The beans are then wired by the plugin instead of relying on autowiring. Here's a sample of bean override:
@Bean
public SAMLContextProvider mySAMLContextProvider() {
return new DSLSAMLContextProvider();
}
Spring MVC Configuration
No default templates are provided with spring-boot-security-saml for IDP selection page, home page, or default logout page. Developers need to configure the desired template engine and make sure that the URLs configured for this plugin are resolvable through Spring MVC. For instance, the following configuration is used in the Demo apps to specify the index page that is also mapped to the logout page:
@Configuration
public static class MvcConfig implements WebMvcConfigurer {
@Override
public void addViewControllers(ViewControllerRegistry registry) {
registry.addViewController("/").setViewName("index");
}
}
In the other hand, idpSelection.html and home.html under resources/templates/ in the Demo apps are implicitly defined as view controllers by Spring Boot's Thymeleaf auto-configuration. For more information on how to configure Spring MVC please visit Spring MVC's Documentation page and Spring Boot's Web Applications Documentation.
Check out the spring-boot-security-saml Demo Apps
In spring-boot-security-saml-demo-dsl, spring-boot-security-saml-demo-props there are working demos of this plugin using the Java DSL style and Configuration Properties style respectively. Also, checkout spring-boot-security-saml-demo-okta for a working demo using Okta as IDP.
Check out the spring-security-saml-sample Sample App
In spring-security-saml-sample there's a fully working Spring Boot app integrated with regular Spring Security SAML and several IdPs (SSOCircle, Ping Identity, OKTA, OneLogin). In this sample you can check the amount of configuration required to integrate spring-security-saml with Spring Boot.
Configuration Cookbook
These examples are intended to cover some usual Spring Security SAML configuration scenarios through this plugin to showcase the dynamics of the new configuration style. It is not meant as extensive documentation of Spring Security SAML or the SAML 2.0 standard. For documentation regarding Spring Security SAML and SAML 2.0 please see Further Documentation section.
Configure your application behind a load balancer
In order to successfully redirect to the appropriate URLs when having your Spring Boot application behind a Load Balancer spring-security-saml provides an alternate SAMLContextProviderLB. This bean can be configured through the DSL and config properties as of spring-boot-security-saml:1.12 like this:
@Configuration
public static class MyServiceProviderConfig extends ServiceProviderConfigurerAdapter {
@Override
public void configure(ServiceProviderBuilder serviceProvider) throws Exception {
serviceProvider
.metadataGenerator()
.entityId("localhost-demo")
.and()
.sso()
.defaultSuccessURL("/home")
.idpSelectionPageURL("/idpselection")
.and()
.logout()
.defaultTargetURL("/")
.and()
.metadataManager()
.metadataLocations("classpath:/idp-ssocircle.xml")
.refreshCheckInterval(0)
.and()
.extendedMetadata()
.idpDiscoveryEnabled(true)
.and()
.keyManager()
.privateKeyDERLocation("classpath:/localhost.key.der")
.publicKeyPEMLocation("classpath:/localhost.cert")
.and()
.samlContextProviderLb()
.scheme("https")
.contextPath("/")
.serverName("www.example.com")
.serverPort(443)
.includeServerPortInRequestURL(false);
}
}
Or using the properties:
saml.sso.context-provider.lb.context-path=/
saml.sso.context-provider.lb.include-server-port-in-request-url=false
saml.sso.context-provider.lb.scheme=https
saml.sso.context-provider.lb.server-name=www.example.com
saml.sso.context-provider.lb.server-port=443
SHA256 Signature
Some IDPs like ADFS require SHA256 message signature. For this you can just override the SAMLBootstrap bean like this:
public final class CustomSAMLBootstrap extends SAMLBootstrap {
@Override
public void postProcessBeanFactory(ConfigurableListableBeanFactory beanFactory) throws BeansException {
super.postProcessBeanFactory(beanFactory);
BasicSecurityConfiguration config = (BasicSecurityConfiguration) Configuration.getGlobalSecurityConfiguration();
config.registerSignatureAlgorithmURI("RSA", SignatureConstants.ALGO_ID_SIGNATURE_RSA_SHA256);
config.setSignatureReferenceDigestMethod(SignatureConstants.ALGO_ID_DIGEST_SHA256);
}
}
@Bean
public static SAMLBootstrap SAMLBootstrap() {
return new CustomSAMLBootstrap();
}
Custom SAML Message Storage
spring-security-saml stores SAML messages in session by default, if you wanna provide your own SAML storage you can provide a custom SAMLContextProviderwith a custom SAMLMessageStorageFactory.
With DSL:
@Override
public void configure(ServiceProviderBuilder serviceProvider) throws Exception {
SAMLContextProviderImpl contextProvider = new SAMLContextProviderImpl();
contextProvider.setStorageFactory(customMessageStorageFactory);
serviceProvider
.samlContextProvider(contextProvider);
// rest of configuration
}
Overriding SAMLContextProvider Bean:
@Bean
SAMLContextProvider mySamlContextProvider(SAMLMessageStorageFactory messageStorageFactory) {
DSLSAMLContextProviderImpl contextProvider = new DSLSAMLContextProviderImpl();
contextProvider.setStorageFactory(messageStorageFactory);
return contextProvider;
}
Configure Bindings
You may wanna set the bindings to use with Your IDP, this is how you can do it through the DSL:
@Override
public void configure(ServiceProviderBuilder serviceProvider) throws Exception {
WebSSOProfileOptions profileOptions = new WebSSOProfileOptions();
//POST Bindings
profileOptions.setBinding(SAMLConstants.SAML2_POST_BINDING_URI);
//REDIRECT Bindings
profileOptions.setBinding(SAMLConstants.SAML2_REDIRECT_BINDING_URI);
serviceProvider
.sso()
.profileOptions(profileOptions);
// rest of configuration
}
Static SP Metadata
You may wanna define your Service Provider Metadata statically. Usually there's no reason to do that since the SP metada configuration API through the DSL is pretty rich and is generated based on specified URLs and so on. But in case this is the way you prefer to setup your SP. Here's a sample config on how you can accomplish that:
@Configuration
public static class MyServiceProviderConfig extends ServiceProviderConfigurerAdapter {
@Override
public void configure(ServiceProviderBuilder serviceProvider) throws Exception {
// @formatter:off
serviceProvider
.metadataGenerator()
.entityId("localhost-demo")
.and()
.sso()
.defaultSuccessURL("/home")
.idpSelectionPageURL("/idpselection")
.and()
.logout()
.defaultTargetURL("/")
.and()
.metadataManager()
.metadataLocations("classpath:/idp-ssocircle.xml")
.localMetadataLocation("classpath:/sp-ssocircle.xml")
.refreshCheckInterval(0)
.and()
.extendedMetadata()
.idpDiscoveryEnabled(true)
.and()
.localExtendedMetadata()
.securityProfile("metaiop")
.sslSecurityProfile("pkix")
.signMetadata(true)
.signingKey("localhost")
.encryptionKey("localhost")
.requireArtifactResolveSigned(false)
.requireLogoutRequestSigned(false)
.idpDiscoveryEnabled(true)
.and()
//This Keystore contains also the public key of idp.ssocircle.com
.keyManager()
.storeLocation("classpath:/localhost.jks")
.storePass("foobar")
.defaultKey("localhost")
.keyPassword("localhost", "foobar");
// @formatter:on
}
}
The part of the configuration that's specifically for static local metadata are serviceProvider.metadataManager().localMetadataLocaltion("sp-ssocircle.xml") and the options specified in serviceProvider.localExtendedMetadata(). Notice that when specifying this options, MetadataGeneratorFilter is no longer used, since the Service Provider metadata is specified statically. The endpoint /saml/metadata will then display the contents of the specified static metadata file.
Generate a Self Signed Private/Public key pair in DER/PEM format
# KEY AND CERT
openssl genrsa -out localhost.key 2048
openssl req -new -x509 -key localhost.key -out localhost.pem -days 3650 -subj /CN=localhost
# PEM KEY to DER
openssl pkcs8 -topk8 -inform PEM -outform DER -in localhost.key -out localhost.key.der -nocrypt
Add your own SAMLUserDetailsService
In order to add a custom SAMLUserDetailsService simply use the authenticationProvider() builder from the ServiceProviderBuilder DSL:
@Configuration
public static class MyServiceProviderConfig extends ServiceProviderConfigurerAdapter {
@Override
public void configure(ServiceProviderBuilder serviceProvider) throws Exception {
serviceProvider
.authenticationProvider()
.userDetailsService(new MySAMLUserDetailsService());
}
}
Or simply add a bean definition for a SAMLUserDetailsService implementation:
@Bean
public SAMLUserDetailsService mySamlUserDetailsService() {
return new MySAMLUserDetailsService();
}
Further Documentation
For configuration specifics about Spring Security SAML please visit their Documentation Reference. For SAML 2.0 documentation these are good starting points:
Credits
Special thanks to:
- @vdenotaris for his original work on creating a sample
spring-bootapp withspring-security-samlthat inspired this plugin. - @vschafer for creating
spring-security-saml. Without his work, this plugin woudn't be possible. - @rwinch, whose kind advice and
spring-security-saml-dslinspired this plugin. - The Spring Team, for creating amazing open source software.
License
Lincensed under MIT License