JarCastingCPU Test Suite
General unit-testing framework intended for testing emuStudio CPU plug-ins. More specifically, it allows to test correctness of the implementation of CPU instructions. Tests are specified in a declarative way; specific test cases are generated based on the declarative specification.
The idea of generating test cases was inspired by "QuickCheck" project.
Features
- Generates test cases for values (8-bit, 16-bit, unary, binary)
- Tests are specified using Builder pattern
- Automatic environment setup (e.g. fill memory with a program, set up initial CPU flags, or set up registers)
Usage
For Maven, use:
<dependency>
<groupId>net.emustudio</groupId>
<artifactId>cpu-testsuite_11.5</artifactId>
<version>1.1.0</version>
<scope>test</scope>
</dependency>
For Gradle, use:
testImplementation 'net.emustudio:cpu-testsuite_11.5:1.1.0'
NOTE: Artifact name ends with major.minor emuLib version (currently _11.5).
When to use CPU Test Suite
The suite can be used for testing CPU plugins for emuStudio only if the following requirements are fulfiled:
- operating memory, used by the CPU, is a collection of linearly ordered cells
- operating memory cell type is
ShortorByte - CPU is using little endian
- CPU has a program counter register (or "instruction pointer") or similar
- CPU has a stack pointer register
- Instruction operands are either
Byte(8-bit) orInteger(16-bit)
Getting started
In order to help you get started, this section shows and describes some code snippets.
CPU instructions operate either with a CPU state or with some data (registers or memory). When we say we are "testing an instruction", we mean by this a verification of the correctness of instruction evaluation. The testing process is as follows:
- Setup the initial CPU state and environment (register values, memory cell values, flags) - usually generate it according to some rules
- Run the instruction
- Check the output - CPU state, register(s), flags, or memory.
- Repeat for another test case
Each CPU is different. Therefore, the test suite needs specific implementations of several interfaces (or abstract classes):
- custom implementation of
CpuRunnerabstract class (the virtual computer) - custom implementation of
CpuVerifierabstract class
Those should be instantiated before each test (tests will make them "dirty"). Then, within the JUnit test, the next step is to create a "test builder" instance (provided by this framework), which uses the CpuRunner and CpuVerifier objects.
Optionally, to be able to verify CPU flags, the plugin might want to implement FlagsCheck abstract class, which will compute flags based on the result and the RunnerContext object, which represents the previous environment state (first operand, second operand, flags, PC, SP, and possibly other registers).
Let's use 8080 CPU for now, and let's test the SUB instruction. The test might look as follows:
import static net.emustudio.cpu.testsuite.Generator.*;
import net.emustudio.cpu.testsuite.memory.ShortMemoryStub;
import net.emustudio.intel8080.impl.suite.CpuRunnerImpl;
import net.emustudio.intel8080.impl.suite.CpuVerifierImpl;
import org.junit.After;
import org.junit.Before;
public class CpuTest {
private CpuRunnerImpl cpuRunnerImpl;
private CpuVerifierImpl cpuVerifierImpl;
private CpuImpl cpu;
@Before
public void setUp() throws PluginInitializationException {
ShortMemoryStub memoryStub = new ShortMemoryStub(NumberUtils.Strategy.LITTLE_ENDIAN);
cpu = new CpuImpl(...);
// simulate emuStudio boot
cpu.initialize(...);
cpuRunnerImpl = new CpuRunnerImpl(cpu, memoryStub);
cpuVerifierImpl = new CpuVerifierImpl(cpu, memoryStub);
Generator.setRandomTestsCount(10); // How many test cases should be generated
}
@After
public void tearDown() {
cpu.destroy();
}
@Test
public void testSUB() {
// ByteTestBuilder specifies that instruction operands are bytes
ByteTestBuilder test = new ByteTestBuilder(cpuRunnerImpl, cpuVerifierImpl)
.firstIsRegister(REG_A)
.verifyRegister(REG_A, context -> (context.first & 0xFF) - (context.second & 0xFF))
.verifyFlagsOfLastOp(new FlagsBuilderImpl().sign().zero().carry().auxCarry().parity())
.keepCurrentInjectorsAfterRun();
forSome8bitBinaryWhichEqual(
test.run(0x97)
);
forSome8bitBinary(
test.secondIsRegister(REG_B).run(0x90),
test.secondIsRegister(REG_C).run(0x91),
test.secondIsRegister(REG_D).run(0x92),
test.secondIsRegister(REG_E).run(0x93),
test.secondIsRegister(REG_H).run(0x94),
test.secondIsRegister(REG_L).run(0x95),
test.setPair(REG_PAIR_HL, 1).secondIsMemoryByteAt(1).run(0x96)
);
}
}
It might seem complex, but all makes sense. At first, we need to know, if we operate with bytes or integers (words). Therefore, we create new ByteTestBuilder. There exists also IntegerTestBuilder class for operating with 16-bit values.
Instruction SUB takes 1 argument - the register, e.g. SUB B, which substracts register B from register A. In other words:
SUB B = A - B
Generally, instruction SUB will always be evaluated as A - register. Therefore we know, that first operand is always register A:
.firstIsRegister(REG_A)
NOTE: Constant REG_A is defined in our 8080 CPU.
That's it for preparing the environment. Now, we want to verify, that after performing the "subtract" operation, we get result in register A with the correct value:
.verifyRegister(REG_A, context -> (context.first & 0xFF) - (context.second & 0xFF))
We supply the computation based on the two values, which will be generated later. The values are accessible from context object, as member values context.first and context.second. What you see above is a lambda (feature from Java 8), taking the testing context object, and performing the subtract operation with given values.
NOTE: Here, you must be very careful; if you write the computation wrongly, the test will expect wrong results.
Also, the instruction is affecting flags in CPU. It is enough to specify that with the following statement:
.verifyFlagsOfLastOp(new FlagsBuilderImpl().sign().zero().carry().auxCarry().parity())
Here, we are saying: verify flags of the last operation (taken from the previous line - the subtract), and we supply the flags using FlagsBuilderImpl class - sign, zero, carry, auxiliary carry and parity. The class however must be implemented manually, in order to preserve the generality of the Test Suite. Each CPU has different flags with different semantics. But don't worry, it is not difficult.
And we're almost done with the test specification. Now, we must say that after we create a test, we want to keep the environment we set up before (in our case setting that the first operand will be stored in register A - before the operation). We do this with line:
.keepCurrentInjectorsAfterRun();
And now, we can 'generate' tests for various random-generated combinations of operands. This is the strongest feature of the suite, and frees us from creating manual examples of the instruction input and output data. It saves a lot of time. We just say:
Generator.forSome8bitBinaryWhichEqual(
test.run(0x97)
);
And the generator will generate some 8-bit pair of values, which equal. And we run the test for all the generated values on a SUB A instruction (which has opcode 0x97). Here, is the trick. In this statement, we test instruction SUB A, which means:
SUB A = A - A
So in order to have valid test, and we have binary values from generator (we need to have both context.first and context.second), we need to have them equal, because they represent the same value - in register A.
The final part of the test is much more obvious:
Generator.forSome8bitBinary(
test.secondIsRegister(REG_B).run(0x90),
test.secondIsRegister(REG_C).run(0x91),
test.secondIsRegister(REG_D).run(0x92),
test.secondIsRegister(REG_E).run(0x93),
test.secondIsRegister(REG_H).run(0x94),
test.secondIsRegister(REG_L).run(0x95),
test.setPair(REG_PAIR_HL, 1).secondIsMemoryByteAt(1).run(0x96)
);
Here we want to run 7 tests, for each SUB variation - for registers B, C, D, etc. So for the specific test we must say, that the second generated operand will be stored in the given register, before we actually 'run' the test. Since we did not specify keepCurrentInjectorsAfterRun() after this step, the next step will not remember the previous setting for the second operand. Only the first operand, for register A will be remembered for all tests.
The last line is interesting, with preparing register pair HL=1 and second operand to the memory at address 1, we can safely run SUB M with opcode 0x96, which actually does the following:
SUB M = A - [HL]
For more information, see Javadoc of the project, and real usage in available emuStudio CPU plug-ins.
