JarCastingReact Hot Loader
Tweak React components in real time
Watch Dan Abramov's talk on Hot Reloading with Time Travel.
Moving towards next step
React-Hot-Loader has been your friendly neighbour, living outside of React. But it has been limiting its powers and causing not the greatest experience. It's time to make a next step.
React-Hot-Loader is expected to be replaced by React Fast Refresh. Please remove React-Hot-Loader if Fast Refresh is currently supported on your environment.
React Native- supports Fast Refresh since 0.61.parcel 2- supports Fast Refresh since alpha 3.webpack- supports Fast Refresh using a plugin.other bundler- no support yet, use React-Hot-Loader
Install
npm install react-hot-loader
Note: You can safely install react-hot-loader as a regular dependency instead of a dev dependency as it automatically ensures it is not executed in production and the footprint is minimal.
Getting started
- Add
react-hot-loader/babelto your.babelrc:
// .babelrc
{
"plugins": ["react-hot-loader/babel"]
}
- Mark your root component as hot-exported:
// App.js
import { hot } from 'react-hot-loader/root';
const App = () => <div>Hello World!</div>;
export default hot(App);
- Make sure
react-hot-loaderis required beforereactandreact-dom:
- or
import 'react-hot-loader'in your main file (before React) - or prepend your webpack entry point with
react-hot-loader/patch, for example:// webpack.config.js module.exports = { entry: ['react-hot-loader/patch', './src'], // ... };
- If you need hooks support, use
@hot-loader/react-dom
Hook support
Hooks would be auto updated on HMR if they should be. There is only one condition for it - a non zero dependencies list.
❄️ useState(initialState); // will never updated (preserve state)
❄️ useEffect(effect); // no need to update, updated on every render
❄️ useEffect(effect, []); // "on mount" hook. "Not changing the past"
🔥 useEffect(effect, [anyDep]); // would be updated
🔥 useEffect(effect, ["hot"]); // the simplest way to make hook reloadable
Plus
- any hook would be reloaded on a function body change. Enabled by default, controlled by
reloadHooksOnBodyChangeoption. - you may configure RHL to reload any hook by setting
reloadLifeCycleHooksoption to true.
To disable hooks reloading - set configuration option:
import { setConfig } from 'react-hot-loader';
setConfig({
reloadHooks: false,
});
With this option set all useEffects, useCallbacks and useMemo would be updated on Hot Module Replacement.
Hooks reset
Hooks would be reset if their order changes. Adding, removing or moving around would cause a local tree remount.
Babel plugin is required for this operation. Without it changing hook order would throw an error which would be propagated till the nearest class-based component.
@hot-loader/react-dom
@hot-loader/react-dom replaces the "react-dom" package of the same version, but with additional patches to support hot reloading.
There are 2 ways to install it:
- Use yarn name resolution, so
@hot-loader/react-domwould be installed instead ofreact-dom
yarn add react-dom@npm:@hot-loader/react-dom
- Use webpack aliases
yarn add @hot-loader/react-dom
// webpack.config.js
module.exports = {
// ...
resolve: {
alias: {
'react-dom': '@hot-loader/react-dom',
},
},
};
Old API
Note: There is also an old version of hot, used prior to version 4.5.4. Please use the new one, as it is much more resilient to js errors that you may make during development.
Meanwhile, not all the bundlers are compatible with new /root API, for example parcel is not.
React-Hot-Load will throw an error, asking you to use the old API, if such incompatibility would be detected. It is almost the same, but you have to pass module inside hot.
import { hot } from 'react-hot-loader';
const App = () => <div>Hello World!</div>;
export default hot(module)(App);
webpack-dev-server --hot
What about production?
The webpack patch, hot, Babel plugin, @hot-loader/react-dom etc. are all safe to use in production; they leave a minimal footprint, so there is no need to complicate your configuration based on the environment. Using the Babel plugin in production is even recommended because it switches to cleanup mode.
Just ensure that the production mode has been properly set, both as an environment variable and in your bundler. E.g. with webpack you would build your code by running something like:
NODE_ENV=production webpack --mode production
NODE_ENV=production is needed for the Babel plugin, while --mode production uses webpack.DefinePlugin to set process.env.NODE_ENV inside the compiled code itself, which is used by hot and @hot-loader/react-dom.
Make sure to watch your bundle size when implementing react-hot-loader to ensure that you did it correctly.
Limitations
- (that's the goal) React-Hot-Loader would not change the past, only update the present - no lifecycle event would be called on component update. As a result, any code changes made to
componentWillUnmountorcomponentDidMountwould be ignored for already created components. - (that's the goal) React-Hot-Loader would not update any object, including component
state. - (1%) React-Hot-Loader may not apply some changes made to a component's
constructor. Unless an existing component is recreated, RHL would typically inject new data into that component, but there is no way to detect the actual change or the way it was applied, especially if the change was made to a function. This is because of the way React-Hot-Loader works - it knows what class functions are, not how they were created. See #1001 for details.
Recipes
Migrating from create-react-app
- Run
npm run eject - Install React Hot Loader (
npm install --save-dev react-hot-loader) - In
config/webpack.config.dev.js, add'react-hot-loader/babel'to Babel loader configuration. The loader should now look like:
{
test: /\.(js|jsx)$/,
include: paths.appSrc,
loader: require.resolve('babel-loader'),
options: {
// This is a feature of `babel-loader` for webpack (not Babel itself).
// It enables caching results in ./node_modules/.cache/babel-loader/
// directory for faster rebuilds.
cacheDirectory: true,
plugins: ['react-hot-loader/babel'],
},
}
- Mark your App (
src/App.js) as hot-exported:
// ./containers/App.js
import React from 'react';
import { hot } from 'react-hot-loader';
const App = () => <div>Hello World!</div>;
export default hot(module)(App);
Migrating from create-react-app without ejecting
Users report, that it is possible to use react-app-rewire-hot-loader to setup React-hot-loader without ejecting.
TypeScript
As of version 4, React Hot Loader requires you to pass your code through Babel to transform it so that it can be hot-reloaded. This can be a pain point for TypeScript users, who usually do not need to integrate Babel as part of their build process.
Fortunately, it's simpler than it may seem! Babel will happily parse TypeScript syntax and can act as an alternative to the TypeScript compiler, so you can safely replace ts-loader or awesome-typescript-loader in your Webpack configuration with babel-loader. Babel won't typecheck your code, but you can use fork-ts-checker-webpack-plugin (and/or invoke tsc --noEmit) as part of your build process instead.
A sample configuration:
{
// ...you'll probably need to configure the usual Webpack fields like "mode" and "entry", too.
resolve: { extensions: [".ts", ".tsx", ".js", ".jsx"] },
module: {
rules: [
{
test: /\.(j|t)sx?$/,
exclude: /node_modules/,
use: {
loader: "babel-loader",
options: {
cacheDirectory: true,
babelrc: false,
presets: [
[
"@babel/preset-env",
{ targets: { browsers: "last 2 versions" } } // or whatever your project requires
],
"@babel/preset-typescript",
"@babel/preset-react"
],
plugins: [
// plugin-proposal-decorators is only needed if you're using experimental decorators in TypeScript
["@babel/plugin-proposal-decorators", { legacy: true }],
["@babel/plugin-proposal-class-properties", { loose: true }],
"react-hot-loader/babel"
]
}
}
}
]
},
plugins: [
new ForkTsCheckerWebpackPlugin()
]
};
For a full example configuration of TypeScript with React Hot Loader and newest beta version of Babel, check here.
As an alternative to this approach, it's possible to chain Webpack loaders so that your code passes through Babel and then TypeScript (or TypeScript and then Babel), but this approach is not recommended as it is more complex and may be significantly less performant. Read more discussion here.
Parcel
Parcel supports Hot Module Reloading out of the box, just follow step 1 and 2 of Getting Started.
We also have a full example running Parcel + React Hot Loader.
Electron
You need something to mark your modules as hot in order to use React Hot Loader.
One way of doing this with Electron is to simply use webpack like any web-based project might do and the general guide above describes. See also this example Electron app.
A webpack-less way of doing it to use electron-compile (which is also used by electron-forge) - see this example. While it requires less configuration, something to keep in mind is that electron-compile's HMR will always reload all modules, regardless of what was actually edited.
Source Maps
If you use devtool: 'source-map' (or its equivalent), source maps will be emitted to hide hot reloading code.
Source maps slow down your project. Use devtool: 'eval' for best build performance.
Hot reloading code is just one line in the beginning and one line at the end of each module so you might not need source maps at all.
Linking
If you are using npm link or yarn link for development purposes, there is a chance you will get error Module not found: Error: Cannot resolve module 'react-hot-loader' or the linked package is not hot reloaded.
There are 2 ways to fix Module not found:
- Use
includein loader configuration to only opt-in your app's files to processing. - Alternatively if you are using webpack, override the module resolution in your config:
{
resolve: {
alias: {
'react-hot-loader': path.resolve(path.join(__dirname, './node_modules/react-hot-loader')),
}
}
}
And to make your linked package to be hot reloaded, it will need to use the patched version of react and react-dom, if you're using webpack, add this options to the alias config
{
resolve: {
alias: {
'react-hot-loader': path.resolve(path.join(__dirname, './node_modules/react-hot-loader')),
// add these 2 lines below so linked package will reference the patched version of `react` and `react-dom`
'react': path.resolve(path.join(__dirname, './node_modules/react')),
'react-dom': path.resolve(path.join(__dirname, './node_modules/react-dom')),
// or point react-dom above to './node_modules/@hot-loader/react-dom' if you are using it
}
}
}
Preact
React-hot-loader should work out of the box with preact-compat, but, in case of pure preact, you will need to configure it:
- create configuration file (setupHotLoader.js)
import reactHotLoader from 'react-hot-loader';
import preact from 'preact';
reactHotLoader.preact(preact);
- dont forget to import it
Preact limitations
- HOCs and Decorators as not supported yet. For Preact React-Hot-Loader v4 behave as v3.
React Native
React Native supports hot reloading natively as of version 0.22.
Using React Hot Loader with React Native can cause unexpected issues (see #824) and is not recommended.
Webpack plugin
We recommend using the babel plugin, but there are some situations where you are unable to. If so, try the webpack plugin / webpack-loader (as seen in v3).
Remember - the webpack plugin is not compatible with class-based components. The babel plugin will inject special methods to every class, to make class members (like onClick) hot-updatable, while the webpack plugin would leave classes as is, without any instrumentation.
class MyComponent extends React.Component {
onClick = () => this.setState(); // COULD NOT UPDATE
variable = 1; // this is ok
render() {} // this is ok
}
But webpack-loader could help with TypeScript or spreading "cold API" to all node_modules.
It is possible to enable this loader for all the files, but if you use
babelplugin, you need to enable this loader forreact-domonly. Place it after babel-loader, if babel-loader is present.
// webpack.config.js
module.exports = {
module: {
rules: [
// would only land a "hot-patch" to react-dom
{
test: /\.js$/,
include: /node_modules\/react-dom/,
use: ['react-hot-loader/webpack'],
},
],
},
};
Webpack plugin will also land a "hot" patch to react-dom, making React-Hot-Loader more compliant to the principles.
If you are not using babel plugin you might need to apply webpack-loader to all the files.
{
test: /\.jsx?$/,
include: /node_modules/,
use: ['react-hot-loader/webpack']
},
Code Splitting
If you want to use Code Splitting + React Hot Loader, the simplest solution is to pick a library compatible with this one:
If you use a not-yet-friendly library, like react-async-component, or are having problems with hot reloading failing to reload code-split components, you can manually mark the components below the code-split boundaries.
// AsyncHello.js
import { asyncComponent } from 'react-async-component';
// asyncComponent could not `hot-reload` itself.
const AsyncHello = asyncComponent({
resolve: () => import('./Hello'),
});
export default AsyncHello;
Note that Hello is the component at the root of this particular code-split chunk.
// Hello.js
import { hot } from 'react-hot-loader/root';
const Hello = () => 'Hello';
export default hot(Hello); // <-- module will reload itself
Wrapping this root component with hot() will ensure that it is hot reloaded correctly.
Out-of-bound warning
You may see the following warning when code-split components are updated:
React-Hot-Loader: some components were updated out-of-bound. Updating your app to reconcile the changes.
This is because the hot reloading of code-split components happens asynchronously. If you had an App.js that implemented the AsyncHello component above and you modified AsyncHello, it would be bundled and reloaded at the same time as App.js. However, the core hot reloading logic is synchronous, meaning that it's possible for the hot reload to run before the updates to the split component have landed.
In this case, RHL uses a special tail update detection logic, where it notes that an an update to a split component has happened after the core hot reloading logic has already finished, and it triggers another update cycle to ensure that all changes are applied.
The warning is informational - it is a notice that this tail update logic is triggered, and does not indicate a problem in the configuration or useage of react-hot-loader.
If the tail update detection is not something you want or need, you can disable this behavior by setting setConfig({ trackTailUpdates:false }).
Checking Element types
Because React Hot Loader creates proxied versions of your components, comparing reference types of elements won't work:
const element = <Component />;
console.log(element.type === Component); // false
React Hot Loader exposes a function areComponentsEqual to make it possible:
import { areComponentsEqual } from 'react-hot-loader';
const element = <Component />;
areComponentsEqual(element.type, Component); // true
Another way - compare "rendered" element type
const element = <Component />;
console.log(element.type === <Component />.type); // true
// better - precache rendered type
const element = <Component />;
const ComponentType = <Component />.type;
console.log(element.type === ComponentType); // true
But you might have to provide all required props. See original issue. This is most reliable way to compare components, but it will not work with required props.
Another way - compare Component name.
Not all components have a name. In production displayName could not exists.
const element = <Component />;
console.log(element.displayName === 'Component'); // true
This is something we did not solve yet. Cold API could help keep original types.
Webpack ExtractTextPlugin
webpack ExtractTextPlugin is not compatible with React Hot Loader. Please disable it in development:
new ExtractTextPlugin({
filename: 'styles/[name].[contenthash].css',
disable: NODE_ENV !== 'production',
});
Disabling a type change (
❄️
)
It is possible to disable React-Hot-Loader for a specific component, especially to enable common way to type comparison. See #991 for the idea behind
import { cold } from 'react-hot-loader';
cold(SomeComponent) // this component will ignored by React-Hot-Loader
<SomeComponent />.type === SomeComponent // true
If you will update cold component React-Hot-Loader will complain (on error level), and then React will cold-replace Component with a internal state lose.
Reach-Hot-Loader: cold element got updated
Disabling a type change for all node_modules
You may cold all components from node_modules. This will not work for HOC(like Redux) or dynamically created Components, but might help in most of situations, when type changes are not welcomed, and modules are not expected to change.
import { setConfig, cold } from 'react-hot-loader';
setConfig({
onComponentRegister: (type, name, file) => file.indexOf('node_modules') > 0 && cold(type),
// some components are not visible as top level variables,
// thus its not known where they were created
onComponentCreate: (type, name) => name.indexOf('styled') > 0 && cold(type),
});
! To be able to "cold" components from 'node_modules' you have to apply babel to node_modules, while this folder is usually excluded. You may add one more babel-loader, with only one React-Hot-Loader plugin inside to solve this. Consider using webpack-loader for this.
React-Hooks
React hooks are not really supported by React-Hot-Loader. Mostly due to our internal processes of re-rendering React Tree, which is required to reconcile an updated application before React will try to rerender it, and fail to do that, obviously.
- hooks should work for versions 4.6.0 and above (
pureSFCis enabled by default). - hooks will produce errors on every hot-update without patches to
react-dom. - hooks may loss the state without patches to
react-dom. - hooks does not support adding new hooks on the fly
- change in hooks for a mounted components will cause a runtime exception, and a
retrybutton (at the nearest class component) will be shown. Pressing aretrybutton will basically remount tree branch.
To mitigate any hook-related issues (and disable their hot-reloadability) - cold them.
- cold components using hooks.
import { setConfig, cold } from 'react-hot-loader';
setConfig({
onComponentCreate: (type, name) =>
(String(type).indexOf('useState') > 0 || String(type).indexOf('useEffect') > 0) && cold(type),
});
API
hot(Component, options)
Mark a component as hot.
Babel plugin
Right now babel plugin has only one option, enabled by default.
safetyNet- will help you properly setup ReactHotLoader.
You may disable it to get more control on the module execution order.
//.babelrc
{
"plugins": [
[
"react-hot-loader/babel",
{
"safetyNet": false
}
]
]
}
Important
!! Use hot only for module exports, not for module imports. !!
import { hot } from 'react-hot-loader/root';
const App = () => 'Hello World!';
export default hot(App);
Keep in mind - by importing react-hot-loader/root you are setting up a boundary for update event propagation.
The higher(in module hierarchy) you have it - the more stuff would be updated on Hot Module Replacement.
To make RHL more reliable and safe, please place hot below (ie somewhere in imported modules):
- react-dom
- redux store creation
- any data, you want to preserve between updates
- big libraries
You may(but it's not required) place hot to the every route/page/feature/lazy chunk, thus make updates more scoped.
You don't need to wrap every component with hot, application work work fine with a single one.
(old)hot(module, options)(Component, options)
Mark a component as hot. The "new" hot is just hidding the first part - hot(module), giving you only the second (App). The "new" hot is using old API.
import { hot } from 'react-hot-loader';
const App = () => 'Hello World!';
export default hot(module)(App);
AppContainer
Mark application as hot reloadable. (Prefer using hot helper, see below for migration details).
This low-level approach lets you make **hot **imports__, not exports.
import React from 'react';
import ReactDOM from 'react-dom';
import { AppContainer } from 'react-hot-loader';
import App from './containers/App';
const render = Component => {
ReactDOM.render(
<AppContainer>
<Component />
</AppContainer>,
document.getElementById('root'),
);
};
render(App);
// webpack Hot Module Replacement API
if (module.hot) {
// keep in mind - here you are configuring HMR to accept CHILDREN MODULE
// while `hot` would configure HMR for the CURRENT module
module.hot.accept('./containers/App', () => {
// if you are using harmony modules ({modules:false})
render(App);
// in all other cases - re-require App manually
render(require('./containers/App'));
});
}
areComponentsEqual(Component1, Component2)
Test if two components have the same type.
import { areComponentsEqual } from 'react-hot-loader';
import Component1 from './Component1';
import Component2 from './Component2';
areComponentsEqual(Component1, Component2); // true or false
setConfig(config)
Set a new configuration for React Hot Loader.
Available options are:
logLevel: specify log level, default to"error", available values are:['debug', 'log', 'warn', 'error']pureSFC: enable Stateless Functional Component. If disabled they will be converted to React Components. Default value: false.ignoreSFC: skip "patch" for SFC. "Hot loading" could still work, with webpack-patch presentpureRender: do not amendrendermethod of any component.- for the rest see index.d.ts.
// rhlConfig.js
import { setConfig } from 'react-hot-loader';
setConfig({ logLevel: 'debug' });
It is important to set configuration before any other action will take a place
// index.js
import './rhlConfig' // <-- extract configuration to a separate file, and import it in the beggining
import React from 'react'
....
Migrating from v3
AppContainer vs hot
Prior v4 the right way to setup React Hot Loader was to wrap your Application with AppContainer, set setup module acceptance by yourself. This approach is still valid but only for advanced use cases, prefer using hot helper.
React Hot Loader v3:
// App.js
import React from 'react';
const App = () => <div>Hello world!</div>;
export default App;
// main.js
import React from 'react';
import ReactDOM from 'react-dom';
import { AppContainer } from 'react-hot-loader';
import App from './containers/App';
const render = Component => {
ReactDOM.render(
<AppContainer>
<Component />
</AppContainer>,
document.getElementById('root'),
);
};
render(App);
// webpack Hot Module Replacement API
if (module.hot) {
module.hot.accept('./containers/App', () => {
// if you are using harmony modules ({modules:false})
render(App);
// in all other cases - re-require App manually
render(require('./containers/App'));
});
}
React Hot Loader v4:
// App.js
import React from 'react';
import { hot } from 'react-hot-loader';
const App = () => <div>Hello world!</div>;
export default hot(module)(App);
// main.js
import React from 'react';
import ReactDOM from 'react-dom';
import App from './containers/App';
ReactDOM.render(<App />, document.getElementById('root'));
Patch is optional
Since 4.0 till 4.8
Code is automatically patched, you can safely remove react-hot-loader/patch from your webpack config, if react-hot-loader is required before React in any other way.
Error Boundary is inside every component
Since 4.5.4
On Hot Module Update we will inject componentDidCatch and a special render to every Class-based component you have, making Error Boundaries more local.
After update we will remove all sugar, keeping only Boundaries you've created.
You can provide your own errorReporter, via setConfig({errorReporter}) or opt-out from root ErrorBoundaries setting errorBoundary={false} prop on AppContainer or hot. However - this option affects only SFC behavior, and any ClassComponent would boundary itself.
import { setConfig } from 'react-hot-loader';
import ErrorBoundary from './ErrorBoundary';
// ErrorBoundary will be given error and errorInfo prop.
setConfig({ errorReporter: ErrorBoundary });
If errorReporter is not set - full screen error overlay would be shown.
Setting global Error Reporter
Global Error Reporter would, created a fixed overlay on top the page, would be used to display errors, not handled by errorReporter, and any HMR error.
You may change, or disable this global error overlay
// to disable
setConfig({ ErrorOverlay: () => null });
// to change
setConfig({ ErrorOverlay: MyErrorOverlay });
The UX of existing overlay is a subject to change, and we are open to any proposals.
Known limitations and side effects
Note about hot
hot accepts only React Component (Stateful or Stateless), resulting the HotExported variant of it. The hot function will setup current module to self-accept itself on reload, and will ignore all the changes, made for non-React components. You may mark as many modules as you want. But HotExportedComponent should be the only used export of a hot-module.
Note: Please note how often we have used
exportedkeyword.hotis for exports.
Note: Does nothing in production mode, just passes App through.
New Components keep executing the old code
There is no way to hot-update constructor code, as result even new components will be born as the first ones, and then grow into the last ones. As of today, this issue cannot be solved.
Troubleshooting
If it doesn't work, in 99% of cases it's a configuration issue. A missing option, a wrong path or port. webpack is very strict about configuration, and the best way to find out what's wrong is to compare your project to an already working setup, check out examples, bit by bit.
If something doesn't work, in 99% of cases it's an issue with your code. The Component didn't get registered, due to HOC or Decorator around it, which is making it invisible to the Babel plugin or webpack loader.
We're also gathering Troubleshooting Recipes so send a PR if you have a lesson to share!
Switch into debug mode
Debug mode adds additional warnings and can tells you why React Hot Loader is not working properly in your application.
import { setConfig } from 'react-hot-loader';
setConfig({ logLevel: 'debug' });
Contributors
This project exists thanks to all the people who contribute. Contribute.
Backers
Thank you to all our backers!
Sponsors
Support this project by becoming a sponsor. Your logo will show up here with a link to your website. Become a sponsor
License
MIT