parboiled

Fork of parboiled2 for http4s, sans shapeless dependency

License

License

GroupId

GroupId

org.http4s
ArtifactId

ArtifactId

parboiled_2.12
Last Version

Last Version

2.0.1
Release Date

Release Date

Type

Type

jar
Description

Description

parboiled
Fork of parboiled2 for http4s, sans shapeless dependency
Project URL

Project URL

http://parboiled.org
Project Organization

Project Organization

org.http4s
Source Code Management

Source Code Management

https://github.com/sirthias/parboiled2

Download parboiled_2.12

How to add to project

<!-- https://jarcasting.com/artifacts/org.http4s/parboiled_2.12/ -->
<dependency>
    <groupId>org.http4s</groupId>
    <artifactId>parboiled_2.12</artifactId>
    <version>2.0.1</version>
</dependency>
// https://jarcasting.com/artifacts/org.http4s/parboiled_2.12/
implementation 'org.http4s:parboiled_2.12:2.0.1'
// https://jarcasting.com/artifacts/org.http4s/parboiled_2.12/
implementation ("org.http4s:parboiled_2.12:2.0.1")
'org.http4s:parboiled_2.12:jar:2.0.1'
<dependency org="org.http4s" name="parboiled_2.12" rev="2.0.1">
  <artifact name="parboiled_2.12" type="jar" />
</dependency>
@Grapes(
@Grab(group='org.http4s', module='parboiled_2.12', version='2.0.1')
)
libraryDependencies += "org.http4s" % "parboiled_2.12" % "2.0.1"
[org.http4s/parboiled_2.12 "2.0.1"]

Dependencies

compile (1)

Group / Artifact Type Version
org.scala-lang : scala-library jar 2.12.8

provided (1)

Group / Artifact Type Version
org.scala-lang : scala-reflect jar 2.12.8

test (1)

Group / Artifact Type Version
com.lihaoyi : utest_2.12 jar 0.6.9

Project Modules

There are no modules declared in this project.

parboiled2 – A Macro-Based PEG Parser Generator for Scala 2.12+

Introduction

parboiled2 is a Scala 2.11+ library enabling lightweight and easy-to-use, yet powerful, fast and elegant parsing of arbitrary input text. It implements a macro-based parser generator for Parsing Expression Grammars (PEGs), which runs at compile time and translates a grammar rule definition (written in an internal Scala DSL) into corresponding JVM bytecode.

PEGs are an alternative to Context-Free Grammars (CFGs) for formally specifying syntax, they make a good replacement for regular expressions and have some advantages over the "traditional" way of building parsers via CFGs (like not needing a separate lexer/scanner phase).

parboiled2 is the successor of parboiled 1.x , which provides a similar capability (for Scala as well as Java) but does not actually generate a parser. Rather parboiled 1.x interprets a rule tree structure (which is also created via an internal DSL) against the input, which results in a much lower parsing performance. For more info on how parboiled 1.x and parboiled2 compare see parboiled2 vs. parboiled 1.x. You might also be interested in reading about parboiled2 vs. Scala Parser Combinators and parboiled2 vs. Regular Expressions.

Features

  • Concise, flexible and type-safe DSL for expressing parsing logic
  • Full expressive power of Parsing Expression Grammars, for effectively dealing with most real-world parsing needs
  • Excellent reporting of parse errors
  • Parsing performance comparable to hand-written parsers
  • Easy to learn and use (just one parsing phase (no lexer code required), rather small API)
  • Light-weight enough to serve as a replacement for regular expressions (also strictly more powerful than regexes)

Installation

The artifacts for parboiled2 live on Maven Central and can be tied into your SBT-based Scala project like this:

libraryDependencies += "org.parboiled" %% "parboiled" % "2.2.1"

The latest released version is 2.2.1. It is available for Scala 2.12, 2.13 as well as scala.js 1.2.

parboiled2 has only one single dependency that it will transitively pull into your classpath: shapeless (currently version 2.3.3).

Once on your classpath you can use this single import to bring everything you need into scope:

import org.parboiled2._

There might be potentially newer snapshot builds available in the sonatype snapshots repository located at: https://oss.sonatype.org/content/repositories/snapshots/

You can find the latest ones here: https://oss.sonatype.org/content/repositories/snapshots/org/parboiled/parboiled_2.11/ (Scala 2.11) and https://oss.sonatype.org/content/repositories/snapshots/org/parboiled/parboiled_2.12/ (Scala 2.12)

Example

This is what a simple parboiled2 parser looks like:

import org.parboiled2._

class Calculator(val input: ParserInput) extends Parser {
  def InputLine = rule { Expression ~ EOI }

  def Expression: Rule1[Int] = rule {
    Term ~ zeroOrMore(
      '+' ~ Term ~> ((_: Int) + _)
    | '-' ~ Term ~> ((_: Int) - _))
  }

  def Term = rule {
    Factor ~ zeroOrMore(
      '*' ~ Factor ~> ((_: Int) * _)
    | '/' ~ Factor ~> ((_: Int) / _))
  }

  def Factor = rule { Number | Parens }

  def Parens = rule { '(' ~ Expression ~ ')' }

  def Number = rule { capture(Digits) ~> (_.toInt) }

  def Digits = rule { oneOrMore(CharPredicate.Digit) }
}

new Calculator("1+1").InputLine.run() // evaluates to `scala.util.Success(2)`

This implements a parser for simple integer expressions like 1+(2-3*4)/5 and runs the actual calculation in-phase with the parser. If you'd like to see it run and try it out yourself check out Running the Examples.

Quick Start

A parboiled2 parser is a class deriving from org.parboiled2.Parser, which defines one abstract member:

def input: ParserInput

holding the input for the parsing run. Usually it is best implemented as a val parameter in the constructor (as shown in the Example above). As you can see from this design you need to (re-)create a new parser instance for every parsing run (parser instances are very lightweight).

The "productions" (or "rules") of your grammar are then defined as simple methods, which in most cases consist of a single call to the rule macro whose argument is a DSL expression defining what input the rule is to match and what actions to perform.

In order to run your parser against a given input you create a new instance and call run() on the top-level rule, e.g:

val parser = new MyParser(input)
parser.topLevelRule.run() // by default returns a ``scala.util.Try``

For more info on what options you have with regard to accessing the results of a parsing run check out the section on Access to Parser Results.

How the Parser matches Input

PEG parsers are quite easy to understand as they work just like most people without a lot of background in parsing theory would build a parser "by hand": recursive-descent with backtracking. They have only one parsing phase (not two, like most parsers produced by traditional parser generators like ANTLR), do not require any look-ahead and perform quite well in most real-world scenarios (although they can exhibit exponential runtime for certain pathological languages and inputs).

A PEG parser consists of a number of rules that logically form a "tree", with one "root" rule at the top calling zero or more lower-level rules, which can each call other rules and so on. Since rules can also call themselves or any of their parents the rule "tree" is not really a tree but rather a potentially cyclic directed graph, but in most cases the tree structure dominates, which is why its useful to think of it as a tree with potential cycles.

When a rule is executed against the current position in an input buffer it applies its specific matching logic to the input, which can either succeed or fail. In the success case the parser advances the input position (the cursor) and potentially executes the next rule. Otherwise, when the rule fails, the cursor is reset and the parser backtracks in search of another parsing alternative that might succeed.

For example consider this simple parboiled2 rule:

def foo = rule { 'a' ~ ('b' ~ 'c' | 'b' ~ 'd') }

When this rule is confronted with the input abd the parser matches the input in these steps:

  1. Rule foo starts executing, which calls its first sub-rule 'a'. The cursor is at position 0.
  2. Rule 'a' is executed against input position 0, matches (succeeds) and the cursor is advanced to position 1.
  3. Rule 'b' ~ 'c' | 'b' ~ 'd' starts executing, which calls its first sub-rule 'b' ~ 'c'.
  4. Rule 'b' ~ 'c' starts executing, which calls its first sub-rule 'b'.
  5. Rule 'b' is executed against input position 1, matches (succeeds) and the cursor is advanced to position 2.
  6. Rule 'c' is executed against input position 2 and mismatches (fails).
  7. Rule 'b' ~ 'c' | 'b' ~ 'd' notices that its first sub-rule has failed, resets the cursor to position 1 and calls its 2nd sub-rule 'b' ~ 'd'.
  8. Rule 'b' ~ 'd' starts executing, which calls its first sub-rule 'b'.
  9. Rule 'b' is executed against input position 1, matches and the cursor is advanced to position 2.
  10. Rule 'd' is executed against input position 2, matches and the cursor is advanced to position 3.
  11. Rule 'b' ~ 'd' completes successfully, as its last sub-rule has succeeded.
  12. Rule 'b' ~ 'c' | 'b' ~ 'd' completes successfully, as one of its sub-rules has succeeded.
  13. Rule foo completes execution successfully, as its last sub-rule has succeeded. The whole input "abd" was matched and the cursor is left at position 3 (after the last-matched character).

The Rule DSL

In order to work with parboiled2 effectively you should understand the core concepts behind its rule DSL, mainly the "Value Stack" and how parboiled2 encodes value stack operations in the Scala type system.

Rule Types and the Value Stack

Apart from the input buffer and the cursor the parser manages another important structure: the "Value Stack". The value stack is a simple stack construct that serves as temporary storage for your Parser Actions. In many cases it is used for constructing an AST during the parsing run but it can also be used for "in-phase" computations (like in the Example above) or for any other purpose.

When a rule of a parboiled2 parser executes it performs any combination of the following three things:

  • match input, i.e. advance the input cursor
  • operate on the value stack, i.e. pop values off and/or push values to the value stack
  • perform side-effects

Matching input is done by calling Basic Character Matching rules, which do nothing but match input and advance the cursor. Value stack operations (and other potential side-effects) are performed by Parser Actions.

It is important to understand that rules in parboiled2 (i.e. the rule methods in your parser class) do not directly return some custom value as a method result. Instead, all their consuming and producing values happens as side-effects to the value stack. Thereby the way that a rule interacts with value stack is encoded in the rule's type.

This is the general definition of a parboiled2 rule:

class Rule[-I <: HList, +O <: HList]

This can look scary at first but is really quite simple. An HList is defined by shapeless and is essentially a type of list whose element number and element types are statically known at compile time. The I type parameter on Rule encodes what values (the number and types) the rule pops off the value stack and the O type parameter encodes what values (the number and types) the rule then pushes onto the value stack.

Luckily, in most cases, you won't have to work with these types directly as they can either be inferred or you can use one of these predefined aliases:

type Rule0 = RuleN[HNil]
type Rule1[+T] = RuleN[T :: HNil]
type Rule2[+A, +B] = RuleN[A :: B :: HNil]
type RuleN[+L <: HList] = Rule[HNil, L]
type PopRule[-L <: HList] = Rule[L, HNil]

Here is what these type aliases denote:

Rule0
A rule that neither pops off nor pushes to the value stack, i.e. has no effect on the value stack whatsoever. All Basic Character Matching rules are of this type.
Rule1[+T]
Pushes exactly one value of type T onto the value stack. After Rule0 this is the second-most frequently used rule type.
Rule2[+A, +B]
Pushes exactly two values of types A and B onto the value stack.
RuleN[+L <: HList]
Pushes a number of values onto the value stack, which correspond to the given L <: HList type parameter.
PopRule[-L <: HList]
Pops a number of values off the value stack (corresponding to the given L <: HList type parameter) and does not produce any new value itself.

The rule DSL makes sure that the rule types are properly assembled and carried through your rule structure as you combine Basic Character Matching with Rule Combinators and Modifiers and Parser Actions, so as long as you don't write any logic that circumvents the value stack your parser will be completely type-safe and the compiler will be able to catch you if you make mistakes by combining rules in an unsound way.

Basic Character Matching

The following basic character matching rules are the only way to cause the parser to match actual input and "make progress". They are the "atomic" elements of the rule DSL which are then used by the Rule Combinators and Modifiers to form higher-level rules.


implicit def ch(c: Char): Rule0
Char values can be directly used in the rule DSL and match themselves. There is one notable case where you will have to use the explicit ch wrapper: You cannot use the | operator directly on chars as it denotes the built-in Scala binary "or" operator defined on numeric types (Char is an unsigned 16-bit integer). So rather than saying 'a' | 'b' you will have to say ch('a') | 'b'.

implicit def str(s: String): Rule0
String values can be directly used in the rule DSL and match themselves.

implicit def predicate(p: CharPredicate): Rule0
You can use org.parboiled2.CharPredicate values directly in the rule DSL. CharPredicate is an efficient implementation of character sets and already comes with a number pre-defined character classes like CharPredicate.Digit or CharPredicate.LowerHexLetter.

implicit def valueMap[T](m: Map[String, T]): R

Values of type Map[String, T] can be directly used in the rule DSL and match any of the given map's keys and push the respective value upon a successful match. The resulting rule type depends on T:

T R
Unit Rule0
L <: HList RuleN[L] (pushes all values of L)
T (otherwise) Rule1[T] (pushes only one value)

def anyOf(chars: String): Rule0
This constructs a Rule0 which matches any of the given strings characters.

def noneOf(chars: String): Rule0
This constructs a Rule0 which matches any single character except the ones in the given string and except EOI.

def ignoreCase(c: Char): Rule0
Matches the given single character case insensitively. Note: The given character must be specified in lower-case! This requirement is currently NOT enforced!

def ignoreCase(s: String): Rule0
Matches the given string of characters case insensitively. Note: The given string must be specified in all lower-case! This requirement is currently NOT enforced!

def ANY: Rule0
Matches any character except EOI (end-of-input).

def EOI: Char
The EOI (end-of-input) character, which is a virtual character that the parser "appends" after the last character of the actual input.

def MATCH: Rule0
Matches no character (i.e. doesn't cause the parser to make any progress) but succeeds always. It's the "empty" rule that is mostly used as a neutral element in rule composition.

def MISMATCH[I <: HList, O <: HList]: Rule[I, O]
A rule that always fails. Fits any rule signature.

def MISMATCH0: Rule0
Same as MISMATCH but with a clearly defined type. Use it (rather then MISMATCH) if the call site doesn't clearly "dictate" a certain rule type and using MISMATCH therefore gives you a compiler error.

Rule Combinators and Modifiers

Rules can be freely combined/modified with these operations:


a ~ b

Two rules a and b can be combined with the ~ operator resulting in a rule that only matches if first a matches and then b matches. The computation of the resulting rule type is somewhat involved. Here is an illustration (using an abbreviated HList notation):

a b a ~ b
Rule[, A] Rule[, B] Rule[, A:B]
Rule[A:B:C, D:E:F] Rule[F, G:H] Rule[A:B:C, D:E:G:H]
Rule[A, B:C] Rule[D:B:C, E:F] Rule[D:A, E:F]
Rule[A, B:C] Rule[D:C, E:F] Illegal if D != B

a | b
Two rules a and b can be combined with the | operator to form an "ordered choice" in PEG speak. The resulting rule tries to match a and succeeds if this succeeds. Otherwise the parser is reset and b is tried. This operator can only be used on compatible rules.

&(a)

Creates a "positive syntactic predicate", i.e. a rule that tests if the underlying rule matches but doesn't cause the parser to make any progress (i.e. match any input) itself. Also, all effects that the underlying rule might have had on the value stack are cleared out, the resulting rule type is therefore always Rule0, independently of the type of the underlying rule.

Note that & not itself consuming any input can have surprising implications in repeating constructs, see Non-Termination when using Syntactic Predicates for more details.


!a

Creates a "negative syntactic predicate", i.e. a rule that matches only if the underlying one mismatches and vice versa. A syntactic predicate doesn't cause the parser to make any progress (i.e. match any input) and also clears out all effects that the underlying rule might have had on the value stack. The resulting rule type is therefore always Rule0, independently of the type of the underlying rule.

Note that ! not itself consuming any input can have surprising implications in repeating constructs, see Non-Termination when using Syntactic Predicates for more details.


optional(a)

Runs its inner rule and succeeds even if the inner rule doesn't. The resulting rule type depends on the type of the inner rule:

Type of a Type of optional(a)
Rule0 Rule0
Rule1[T] Rule1[Option[T]]
Rule[I, O <: I] Rule[I, O]

The last case is a so-called "reduction rule", which leaves the value stack unchanged on a type level. This is an example of a reduction rule wrapped with optional:

capture(CharPredicate.Digit) ~ optional(ch('h') ~> ((s: String) => s + "hex"))

The inner rule of optional here has type Rule[String :: HNil, String :: HNil], i.e. it pops one String off the stack and pushes another one onto it, which means that the number of elements on the value stack as well as their types remain the same, even though the actual values might have changed.

As a shortcut you can also use a.? instead of optional(a).


zeroOrMore(a)

Runs its inner rule until it fails, always succeeds. The resulting rule type depends on the type of the inner rule:

Type of a Type of zeroOrMore(a)
Rule0 Rule0
Rule1[T] Rule1[Seq[T]]
Rule[I, O <: I] Rule[I, O]

The last case is a so-called "reduction rule", which leaves the value stack unchanged on a type level. This is an example of a reduction rule wrapped with zeroOrMore:

(factor :Rule1[Int]) ~ zeroOrMore('*' ~ factor ~> ((a: Int, b) => a * b))

The inner rule of zeroOrMore here has type Rule[Int :: HNil, Int :: HNil], i.e. it pops one Int off the stack and pushes another one onto it, which means that the number of elements on the value stack as well as their types remain the same, even though the actual values might have changed.

As a shortcut you can also use a.* instead of zeroOrMore(a).


oneOrMore(a)

Runs its inner rule until it fails, succeeds if its inner rule succeeded at least once. The resulting rule type depends on the type of the inner rule:

Type of a Type of oneOrMore(a)
Rule0 Rule0
Rule1[T] Rule1[Seq[T]]
Rule[I, O <: I] Rule[I, I]

The last case is a so-called "reduction rule", which leaves the value stack unchanged on a type level. This is an example of a reduction rule wrapped with oneOrMore:

(factor :Rule1[Int]) ~ oneOrMore('*' ~ factor ~> ((a: Int, b) => a * b))

The inner rule of oneOrMore here has type Rule[Int :: HNil, Int :: HNil], i.e. it pops one Int off the stack and pushes another one onto it, which means that the number of elements on the value stack as well as their types remain the same, even though the actual values might have changed.

As a shortcut you can also use a.+ instead of oneOrMore(a).


xxx.times(a)

Repeats a rule a given number of times. xxx can be either a positive Int value or a range (<x> to <y>) whereby both <x> and <y> are positive Int values. The resulting rule type depends on the type of the inner rule:

Type of a Type of xxx.times(a)
Rule0 Rule0
Rule1[T] Rule1[Seq[T]]
Rule[I, O <: I] Rule[I, O]

The last case is a so-called "reduction rule", which leaves the value stack unchanged on a type level. This is an example of a reduction rule wrapped with oneOrMore:

(factor :Rule1[Int]) ~ (1 to 5).times('*' ~ factor ~> ((a: Int, b) => a * b))

The inner rule here has type Rule[Int :: HNil, Int :: HNil], i.e. it pops one Int off the stack and pushes another one onto it, which means that the number of elements on the value stack as well as their types remain the same, even though the actual values might have changed.


a.separatedBy(separator: Rule0)

You can use a.separatedBy(b) to create a rule with efficient and automatic support for element separators if a is a rule produced by the zeroOrMore, oneOrMore or xxx.times modifier and b is a Rule0. The resulting rule has the same type as a but expects the individual repetition elements to be separated by a successful match of the separator rule.

As a shortcut you can also use a.*(b) or (a * b) instead of zeroOrMore(a).separatedBy(b). The same shortcut also works for + (oneOrMore).


a ~!~ b
Same as ~ but with "cut" semantics, meaning that the parser will never backtrack across this boundary. If the rule being concatenated doesn't match a parse error will be triggered immediately. Usually you don't need to use this "cut" operator but in certain cases it can help in simplifying grammar construction.

Parser Actions

The Basic Character Matching rules and the Rule Combinators and Modifiers allow you to build recognizers for potentially complex languages, but usually your parser is supposed to do more than simply determine whether a given input conforms to the defined grammar. In order to run custom logic during parser execution, e.g. for creating custom objects (like an AST), you will have to add some "actions" to your rules.


push(value)

push(value) creates a rule that matches no input (but always succeeds, as a rule) and pushes the given value onto the value stack. Its rule type depends on the given value:

Type of value Type of push(value)
Unit Rule0 (identical to run in this case)
L <: HList RuleN[L] (pushes all values of L)
T (otherwise) Rule1[T] (pushes only one value)

Also note that, due to the macro expansion the parboiled2 rule DSL is based on, the given value expression behaves like a call-by-name parameter even though it is not marked as one! This means that the argument expression to push is (re-)evaluated for every rule execution.


capture(a)

Wrapping a rule a with capture turns that rule into one that pushes an additional String instance onto the value stack (in addition to all values that a already pushes itself): the input text matched by a.

For example capture(oneOrMore(CharPredicate.Digit)) has type Rule1[String] and pushes one value onto the value stack: the string of digit characters matched by oneOrMore(CharPredicate.Digit).

Another example: capture("foo" ~ push(42)) has type Rule2[Int, String] and will match input "foo". After successful execution the value stack will have the String "foo" as its top element and 42 underneath.


test(condition: Boolean): Rule0
test implements "semantic predicates". It creates a rule that matches no input and succeeds only if the given condition expression evaluates to true. Note that, due to the macro expansion the parboiled2 rule DSL is based on, the given argument behaves like a call-by-name parameter even though it is not marked as one! This means that the argument expression to test is (re-)evaluated for every rule execution, just as if test would have been defined as def test(condition: => Boolean): Rule0.

a ~> (...)

The ~> operator is the "action operator" and as such the most frequently used way to add custom logic to a rule. It can be applied to any rule and appends action logic to it. The argument to ~> is always a function, what functions are allowed and what the resulting rule type is depends on the type of a.

The basic idea is that the input of the function is popped off the value stack and the result of the function is pushed back onto it. In its basic form the ~> operator therefore transforms the top elements of the value stack into some other object(s).

Let's look at some examples:

(foo: Rule1[Int]) ~> (i => i * 2)

This results in a Rule1[Int] which multiplies the "output" of rule foo by 2.

(foo: Rule2[Int, String]) ~> ((i, s) => s + i.toString)

This results in a Rule1[String] which combines the two "outputs" of rule foo (an Int and a String) into one single String.

(foo: Rule2[Int, String]) ~> (_.toDouble)

This results in a Rule2[Int, Double]. As you can see the function argument to ~> doesn't always have to "take" the complete output of the rule its applied to. It can also take fewer or even more elements. Its parameters are simply matched left to right against the top of the value stack (the right-most parameter matching the top-level element).

(foo: Rule1[String]) ~> ((i :Int, s) => s + i.toString)

This results in a Rule[Int :: HNil, String :: HNil], i.e. a rule that pops one Int value off the stack and replaces it with a String. Note that, while the parameter types to the action function can be inferred if they can be matched against an "output" of the underlying rule, this is not the case for parameters that don't directly correspond to an underlying output. In these cases you need to add an explicit type annotation to the respective action function parameter(s).

If an action function returns Unit it doesn't push anything on the stack. So this rule

(foo: Rule1[String]) ~> (println(_))

has type Rule0.

Also, an action function can also be a Function0, i.e. a function without any parameters:

(foo: Rule1[String]) ~> (() => 42)

This rule has type Rule2[String, Int] and is equivalent to this:

(foo: Rule1[String]) ~ push(42)

An action function can also produce more than one output by returning an HList instance:

(foo: Rule1[String]) ~> (s => s.toInt :: 3.14 :: HNil)

This has type Rule2[Int, Double].

One more very useful feature is special support for case class instance creation:

case class Person(name: String, age: Int)

(foo: Rule2[String, Int]) ~> Person

This has type Rule1[Person]. The top elements of the value stack are popped off and replaced by an instance of the case class if they match in number, order and types to the case class members. This is great for building AST-like structures! Check out the Calculator2 example to see this form in action.

Note that there is one quirk: For some reason this notation stops working if you explicitly define a companion object for your case class. You'll have to write ~> (Person(_, _)) instead.

And finally, there is one more very powerful action type: the action function can itself return a rule! If an action returns a rule this rule is immediately executed after the action application just as if it had been concatenated to the underlying rule with the ~ operator. You can therefore do things like

(foo: Rule1[Int]) ~> (i => test(i % 2 == 0) ~ push(i))

which is a Rule1[Int] that only produces even integers and fails for all others. Or, somewhat unusual but still perfectly legal:

capture("x") ~> (str(_))

which is a Rule0 that is identical to 'x' ~ 'x'.


run(expression)

run is the most versatile parser action. It can have several shapes, depending on the type of its argument expression. If the argument expression evaluates to

  • a rule (i.e. has type R <: Rule[_, _]) the result type of run is this rule's type (i.e. R) and the produced rule is immediately executed.
  • a function with 1 to 5 parameters these parameters are mapped against the top of the value stack, popped and the function executed. Thereby the function behaves just like an action function for the ~> operator, i.e. if it produces a Unit value this result is simply dropped. HList results are pushed onto the value stack (all their elements individually), rule results are immediately executed and other result values are pushed onto the value stack as a single element. The difference between using run and attaching an action function with the ~> operator is that in the latter case the compiler can usually infer the types of the function parameters (if they map to "output" values of the base rule) while with run you always have to explicitly attach type annotation to the function parameters.
  • a function with one HList parameter the behavior is similar to the previous case with the difference that the elements of this parameter HList are mapped against the value stack top. This allows for consumption of an arbitrary number of value stack elements (Note: This feature of run is not yet currently implemented.)
  • any other value the result type of run is an always succeeding Rule0. Since in this case it doesn't interact with the value stack and doesn't match any input all it can do is perform "unchecked" side effects. Note that by using run in this way you are leaving the "safety-net" that the value stack and the rule type system gives you! Make sure you understand what you are doing before using these kinds of run actions!

Also note that, due to the macro expansion the parboiled2 rule DSL is based on, the given block behaves like a call-by-name parameter even though it is not marked as one! This means that the argument expression to run is (re-)evaluated for every rule execution.


runSubParser(f: ParserInput ⇒ Rule[I, O]): Rule[I, O]
This action allows creation of a sub parser and running of one of its rules as part of the current parsing process. The subparser will start parsing at the current input position and the outer parser (the one calling runSubParser) will continue where the sub-parser stopped.

There are a few more members of the Parser class that are useful for writing efficient action logic:

def cursor: Int
The index of the next (yet unmatched) input character. Note: Might be equal to input.length if the cursor is currently behind the last input character!
def cursorChar: Char
The next (yet unmatched) input character, i.e. the one at the cursor index. Identical to if (cursor < input.length) input.charAt(cursor) else EOI but more efficient.
def lastChar: Char
Returns the last character that was matched, i.e. the one at index cursor - 1 and as such is equivalent to charAt(-1). Note that for performance optimization this method does not do a range check, i.e. depending on the ParserInput implementation you might get an exception when calling this method before any character was matched by the parser.
def charAt(offset: Int): Char
Returns the character at the input index with the given delta to the cursor and as such is equivalent to input.charAt(cursor + offset). Note that for performance optimization this method does not do a range check, i.e. depending on the ParserInput implementation you might get an exception if the computed index is out of bounds.
def charAtRC(offset: Int): Char
Same as charAt but range-checked. Returns the input character at the index with the given offset from the cursor. If this index is out of range the method returns EOI.

You can use these to write efficient character-level logic like this:

def hexDigit: Rule1[Int] = rule {
  CharPredicate.HexAlpha ~ push(CharUtils.hexValue(lastChar))
}

Additional Helpers

Base64Parsing
For parsing RFC2045 (Base64) encoded strings parboiled provides the Base64Parsing trait which you can mix into your Parser class. See its source for more info on what exactly it provides. parboiled also comes with the org.parboiled2.util.Base64 class which provides an efficient Base64 encoder/decoder for the standard as well as custom alphabets.

DynamicRuleDispatch
Sometimes an application cannot fully specify at compile-time which of a given set of rules is to be called at runtime. For example, a parser for parsing HTTP header values might need to select the right parser rule for a header name that is only known once the HTTP request has actually been read from the network. To prevent you from having to write a large (and not really efficient) match against the header name for separating out all the possible cases parboiled provides the DynamicRuleDispatch facility. Check out its test for more info on how to use it.

StringBuilding
For certain high-performance use-cases it is sometimes better to construct Strings that the parser is to produce/extract from the input in a char-by-char fashion. To support you in doing this parboiled provides the StringBuilding trait which you can mix into your Parser class. It provides convenient access to a single and mutable StringBuilder instance. As such it operates outside of the value stack and therefore without the full "safety net" that parboiled's DSL otherwise gives you. If you don't understand what this means you probably shouldn't be using the StringBuilding trait but resort to capture and ordinary parser actions instead.

Error Reporting

In many applications, especially with grammars that are not too complex, parboiled provides good error reports right out of the box, without any additional requirements on your part. However, there are cases where you want to have more control over how parse errors are created and/or formatted. This section gives an overview over how parse error reporting works in parboiled and how you can influence it.

The Error Collection Process

As described in the section about How the Parser matches Input above the parser consumes input by applying grammar rules and backtracking in the case of mismatches. As such rule mismatches are an integral part of the parsers operation and do not generally mean that there is something wrong with the input. Only when the root rule itself mismatches and the parser has no backtracking options remaining does it become clear that a parse error is present. At that point however, when the root rule mismatches, the information about where exactly the problematic input was and which of the many rule mismatches that the parser experienced during the run were the "bad" ones is already lost.

parboiled overcomes this problem by simply re-running the failed parser, potentially many times, and "watching" it as it tries to consume the erroneous input. With every re-run parboiled learns a bit more about the position and nature of the error and when this analysis is complete a ParseError instance is constructed and handed to the application as the result of the parsing run, which can then use the error information on its level (e.g. for formatting it and displaying it to the user). Note that re-running the parser in the presence of parse errors does result in unsuccessful parsing runs being potentially much slower than successful ones. However, since in the vast majority of use cases failed runs constitute only a small minority of all parsing runs and the normal flow of application logic is disrupted anyway, this slow-down is normally quite acceptable, especially if it results in better error messages. See the section on Limiting Error Re-Runs if this is not true for your application.

In principle the error reporting process looks like this:

  1. The grammar's root rule is run at maximum speed against the parser input. If this succeeds then all is well and the parsing result is immediately dispatched to the user.
  2. If the root rule did not match we know that there we have a parsing error. The parser is then run again to establish the "principal error location". The principal error location is the first character in the input that could not be matched by any rule during the parsing run. In order words, it is the maximum value that the parser's cursor member had during the parsing run.
  3. Once the error location is known the parser is run again. This time all rule mismatches against the input character at error location are recorded. These rule mismatches are used to determine what input the grammar "expects" at the error location but failed to see. For every such "error rule mismatch" the parser collects the "rule trace", i.e. the stack of rules that led to it. Currently this is done by throwing a special exception that bubbles up through the JVM call stack and records rule stack information on its way up. A consequence of this design is that the parser needs to be re-run once per "error rule mismatch".
  4. When all error rule traces have been collected all the relevant information about the parse error has been extracted and a ParseError instance can be constructed and dispatched to the user.

Note: The real process contains a few more steps to properly deal with the atomic and quiet markers described below. However, knowledge of these additional steps is not important for understanding the basic approach for how ParseError instances are constructed.

Formatting Parse Errors

If a parsing runs fails and you receive a ParseError instance you can call the formatError method on your parser instance to get the error rendered into an error message string:

val errorMsg = parser.formatError(error)

The formatError message can also take an explicit ErrorFormatter as a second argument, which allows you to influence how exactly the error is to be rendered. For example, in order to also render the rule traces you can do:

val errorMsg = parser.formatError(error, new ErrorFormatter(showTraces = true))

Look at the signature of the ErrorFormatter constructor for more information on what rendering options exist.

If you want even more control over the error rendering process you can extend the ErrorFormatter and override its methods where you see fit.

Tweaking Error Reporting

While the error collection process described above yields all information required for a basic "this character was not matched and these characters were expected instead" information you sometimes want to have more control over what exactly is reported as "found" and as "expected".

The atomic Marker

Since PEG parsers are scanner-less (i.e. without an intermediate "TOKEN-stream") they operate directly on the input buffer's character level. As such, by default, parboiled reports all errors on this character level.

For example, if you run the rule "foo" | "fob" | "bar" against input "foxes" you'll get this error message:

Invalid input 'x', expected 'o' or 'b' (line 1, column 3):
foxes
  ^

While this error message is certainly correct, it might not be what you want to show your users, e.g. because foo, fob and bar are regarded as "atomic" keywords of your language, that should either be matched completely or not at all. In this case you can use the atomic marker to signal this to the parser. For example, running the rule atomic("foo") | atomic("fob") | atomic("bar") against input "foxes" yields this error message:

Invalid input "fox", expected "foo", "fob" or "bar" (line 1, column 1):
foxes
^

Of course you can use the atomic marker on any type of rule, not just string rules. It essentially moves the reported error position forward from the principal error position and lifts the level at which errors are reported from the character level to a rule level of your choice.

The quiet Marker

Another problem that more frequently occurs with parboiled's default error reporting is that the list of "expected" things becomes too long. Often the reason for this are rules that deal match input which can appear pretty much anywhere, like whitespace or comments.

Consider this simple language:

def Expr    = rule { oneOrMore(Id ~ Keyword ~ Id).separatedBy(',' ~ WS) ~ EOI }
def Id      = rule { oneOrMore(CharPredicate.Alpha) ~ WS }
def Keyword = rule { atomic(("has" | "is") ~ WS) }
def WS      = rule { zeroOrMore(anyOf(" \t \n")) }

When we run the Expr rule against input "Tim has money, Tom Is poor" we get this error:

Invalid input 'I', expected [ \t \n] or Keyword (line 1, column 20):
Tim has money, Tom Is poor
                   ^

Again the list of "expected" things is technically correct but we don't want to bother the user with the information that whitespace is also allowed at the error location. The quiet marker let's us suppress a certain rule from the expected list if there are also non-quiet alternatives:

def WS = rule { quiet(zeroOrMore(anyOf(" \t \n"))) }

With that change the error message becomes:

Invalid input 'I', expected Keyword (line 1, column 20):
Tim has money, Tom Is poor
                   ^

which is what we want.

Naming Rules

parboiled uses a somewhat involved logic to determine what exactly to report as "mismatched" and "expected" for a given parse error. Essentially the process looks like this:

  1. Compare all rule trace for the error and drop a potentially existing common prefix. This is done because, if all traces share a common prefix, this prefix can be regarded as the "context" of the error which is probably apparent to the user and as such doesn't need to be reported.
  2. For each trace (suffix), find the first frame that tried to start its match at the reported error position. The string representation of this frame (which might be an assigned name) is selected for "expected" reporting.
  3. Duplicate "expected" strings are removed.

So, apart from placing atomic and quiet markers you can also influence what gets reported as "expected" by explicitly naming rules. One way to do this is to pick good names for the rule methods as they automatically attach their name to their rules. The names of val or def members that you use to reference CharPredicate instances also automatically name the respective rule.

If you don't want to split out rules into their own methods you can also use the named modifier. With it you can attach an explicit name to any parser rule. For example, if you run the rule foo from this snippet:

def foo = rule { "aa" | atomic("aaa").named("threeAs") | 'b' | 'B'.named("bigB") }

against input x you'll get this error message:

Invalid input 'x', expected 'a', threeAs, 'b' or bigB (line 1, column 1):
x
^

Manual Error Reporting

If you want to completely bypass parboiled's built-in error reporting logic you can do so by exclusively relying on the fail helper, which causes the parser to immediately and fatally terminate the parsing run with a single one-frame rule trace with a given "expected" message.

For example, the rule "foo" | fail("a true FOO") will produce this error when run against x:

Invalid input 'x', expected a true FOO (line 1, column 1):
x
^

Limiting Error Re-Runs

Really large grammars, especially ones with bugs as they commonly appear during development, can exhibit a very large number of rule traces (potentially thousands) and thus cause the parser to take longer than convenient to terminate an error parsing run. In order to mitigate this parboiled has a configurable limit on the maximum number of rule traces the parser will collect during a single error run. The default limit is 24, you can change it by overriding the errorTraceCollectionLimit method of the Parser class.

Recovering from Parse Errors

Currently parboiled only ever parses up to the very first parse error in the input. While this is all that's required for a large number of use cases there are applications that do require the ability to somehow recover from parse errors and continue parsing. Syntax highlighting in an interactive IDE-like environment is one such example.

Future versions of parboiled might support parse error recovery. If your application would benefit from this feature please let us know in this github ticket.

Advanced Techniques

Meta-Rules

Sometimes you might find yourself in a situation where you'd like to DRY up your grammar definition by factoring out common constructs from several rule definitions in a "meta-rule" that modifies/decorates other rules. Essentially you'd like to write something like this (illegal code!):

def expression = rule { bracketed(ab) ~ bracketed(cd) }
def ab = rule { "ab" }
def cd = rule { "cd" }
def bracketed(inner: Rule0) = rule { '[' ~ inner ~ ']' }

In this hypothetical example bracketed is a meta-rule which takes another rule as parameter and calls it from within its own rule definition.

Unfortunately enabling a syntax such as the one shown above it not directly possible with parboiled. When looking at how the parser generation in parboiled actually works the reason becomes clear. parboiled "expands" the rule definition that is passed as argument to the rule macro into actual Scala code. The rule methods themselves however remain what they are: instance methods on the parser class. And since you cannot simply pass a method name as argument to another method the calls bracketed(ab) and bracketed(cd) from above don't compile.

However, there is a work-around which might be good enough for your meta-rule needs:

def expression = rule { bracketed(ab) ~ bracketed(cd) }
val ab = ()  rule { "ab" }
val cd = ()  rule { "cd" }
def bracketed(inner: ()  Rule0) = rule { '[' ~ inner() ~ ']' }

If you model the rules that you want to pass as arguments to other rules as Function0 instances you can pass them around. Assigning those function instances to val members avoids re-allocation during every execution of the expression rule which would come with a potentially significant performance cost.

Common Mistakes

Disregarding Order Choice

There is one mistake that new users frequently make when starting out with writing PEG grammars: disregarding the "ordered choice" logic of the | operator. This operator always tries all alternatives in the order that they were defined and picks the first match.

As a consequence earlier alternatives that are a prefix of later alternatives will always "shadow" the later ones, the later ones will never be able to match!

For example in this simple rule

def foo = rule { "foo" | "foobar" }

"foobar" will never match. Reordering the alternatives to either "factor out" all common prefixes or putting the more specific alternatives first are the canonical solutions.

If your parser is not behaving the way you expect it to watch out for this "wrong ordering" problem, which might be not that easy to spot in more complicated rule structures.

Non-Termination when using Syntactic Predicates

The syntactic predicate operators, & and !, don't themselves consume any input, so directly wrapping them with a repeating combinator (like zeroOrMore or oneOrMore) will lead to an infinite loop as the parser continuously runs the syntactic predicate against the very same input position without making any progress.

If you use syntactic predicates in a loop make sure to actually consume input as well. For example:

def foo = rule { capture(zeroOrMore( !',' )) }

will never terminate, while

def foo = rule { capture(zeroOrMore( !',' ~ ANY )) }

will capture all input until it reaches a comma.

Unchecked Mutable State

parboiled2 parsers work with mutable state as a design choice for achieving good parsing performance. Matching input and operating on the value stack happen as side-effects to rule execution and mutate the parser state. However, as long as you confine yourself to the value stack and do not add parser actions that mutate custom parser members the rule DSL will protect you from making mistakes.

It is important to understand that, in case of rule mismatch, the parser state (cursor and value stack) is reset to what it was before the rule execution was started. However, if you write rules that have side-effects beyond matching input and operating on the value stack than these side-effects cannot be automatically rolled-back! This means that you will have to make sure that you action logic "cleans up after itself" in the case of rule mismatches or is only used in locations where you know that rule execution can never fail. These techniques are considered advanced and are not recommended for beginners.

The rule DSL is powerful enough to support even very complex parsing logic without the need to resort to custom mutable state, we consider the addition of mutable members as an optimization that should be well justified.

Handling Whitespace

One disadvantage of PEGs over lexer-based parser can be the handling of white space. In a "traditional" parser with a separate lexer (scanner) phase this lexer can simply skip all white space and only generate tokens for the actual parser to operate on. This can free the higher-level parser grammar from all white space treatment.

Since PEGs do not have a lexer but directly operate on the raw input they have to deal with white space in the grammar itself. Language designers with little experience in PEGs can sometime be unsure of how to best handle white space in their grammar.

The common and highly recommended pattern is to match white space always immediately after a terminal (a single character or string) but not in any other place. This helps with keeping your grammar rules properly structured and white space "taken care of" without it getting in the way.


In order to reduce boilerplate in your grammar definition parboiled allows for cleanly factoring out whitespace matching logic into a dedicated rule. By defining a custom implicit conversion from String to Rule0 you can implicitly match whitespace after a string terminal:

class FooParser(val input: ParserInput) extends Parser {
  implicit def wspStr(s: String): Rule0 = rule {
    str(s) ~ zeroOrMore(' ')
  }

  def foo = rule { "foobar" | "foo" } // implicitly matches trailing blanks
  def fooNoWSP = rule { str("foobar") | str("foo") } // doesn't match trailing blanks
}

In this example all usages of a plain string literals in the parser rules will implicitly match trailing space characters. In order to not apply the implicit whitespace matching in this case simply say str("foo") instead of just "foo".

Parsing the whole Input

If you don't explicitly match EOI (the special end-of-input pseudo-character) in your grammar's root rule the parser will not produce an error if, at the end of a parsing run, there is still unmatched input left. This means that if the root rule matches only a prefix of the whole input the parser will report a successful parsing run, which might not be what you want.

As an example, consider this very basic parser:

class MyParser(val input: ParserInput) extends Parser {
  def InputLine = rule { "foo" | "bar" }
}

new MyParser("foo").InputLine.run()  // Success
new MyParser("foot").InputLine.run()  // also Success!!

In the second run of the parser, instead of failing with a ParseError as you might expect, it successfully parses the matching input foo and ignores the rest of the input.

If this is not what you want you need to explicitly match EOI, for example as follows:

def InputLine = rule { ("foo" | "bar") ~ EOI }

Grammar Debugging

TODO

(e.g., use parse.formatError(error, showTraces = true))

Access to Parser Results

In order to run the top-level parser rule against a given input you create a new instance of your parser class and call run() on it, e.g:

val parser = new MyParser(input)
val result = parser.rootRule.run()

By default the type of result in this snippet will be a Try[T] whereby T depends on the type of rootRule:

Type of rootRule Type of rootRule.run()
Rule0 Try[Unit]
Rule1[T] Try[T]
RuleN[L <: HList] (otherwise) Try[L]

The contents of the value stack at the end of the rootRule execution constitute the result of the parsing run. Note that run() is not available on rules that are not of type RuleN[L <: HList].

If the parser is not able to match the input successfully it creates an instance of class ParseError , which is defined like this

case class ParseError(position: Position, charCount: Int, traces: Seq[RuleTrace]) extends RuntimeException

In such cases the Try is completed with a scala.util.Failure holding the ParseError. If other exceptions occur during the parsing run (e.g. because some parser action failed) these will also end up as a Try failure.

parboiled2 has quite powerful error reporting facilities, which should help you (and your users) to easily understand why a particular input does not conform to the defined grammar and how this can be fixed. The formatError method available on the Parser class is of great utility here, as it can "pretty print" a parse error instance, to display something like this (excerpt from the ErrorReportingSpec_):

Invalid input 'x', expected 'f', Digit, hex or UpperAlpha (line 1, column 4):
abcx
   ^

4 rules mismatched at error location:
  targetRule / | / "fgh" / 'f'
  targetRule / | / Digit
  targetRule / | / hex
  targetRule / | / UpperAlpha

Alternative DeliverySchemes

Apart from delivering your parser results as a Try[T] parboiled2 allows you to select another one of the pre-defined Parser.DeliveryScheme alternatives, or even define your own. They differ in how they wrap the three possible outcomes of a parsing run:

  • parsing completed successfully, deliver a result of type T
  • parsing failed with a ParseError
  • parsing failed due to another exception

This table compares the built-in Parser.DeliveryScheme alternatives (the first one being the default):

Import Type of rootRule.run() Success ParseError Other Exceptions
import Parser.DeliveryScheme.Try Try[T] Success Failure Failure
import Parser.DeliveryScheme.Either Either[ParseError, T] Right Left thrown
import Parser.DeliveryScheme.Throw T T thrown thrown

ec: https://github.com/sirthias/parboiled2/blob/master/parboiled-core/src/test/scala/org/parboiled2/ErrorReportingSpec.scala

Running the Examples

Follow these steps to run the example parsers defined here on your own machine:

  1. Clone the parboiled2 repository:

    git clone git://github.com/sirthias/parboiled2.git
    
  2. Change into the base directory:

    cd parboiled2
    
  3. Run SBT:

    sbt "project examples" run
    

Alternatives

parboiled2 vs. parboiled 1.x

TODO

(about one order of magnitude faster, more powerful DSL, improved error reporting, fewer dependencies (more lightweight), but Scala 2.10.3+ only, no error recovery (yet) and no Java version (ever))

parboiled2 vs. Scala Parser Combinators

TODO

(several hundred times (!) faster, better error reporting, more concise and elegant DSL, similarly powerful in terms of language class capabilities, but Scala 2.10.3+ only, 2 added dependencies (parboiled2 + shapeless))

parboiled2 vs. Regular Expressions

TODO

(much easier to read and maintain, more powerful (e.g. regexes do not support recursive structures), faster, but Scala 2.10.3+ only, 2 added dependencies (parboiled2 + shapeless))

Roadmap

TODO

Contributing

TODO

Support

In most cases the parboiled2 mailing list is probably the best place for your needs with regard to support, feedback and general discussion.

Note: Your first post after signup is going to be moderated (for spam protection), but we'll immediately give you full posting privileges if your message doesn't unmask you as a spammer.

You can also use the gitter.im chat channel for parboiled2:

Join the chat at https://gitter.im/sirthias/parboiled2

References

TODO

Credits

Much of parboiled2 was developed by Alexander Myltsev during GSoc 2013, a big thank you for his great work!

Also, without the Macro Paradise made available by Eugene Burmako parboiled2 would probably still not be ready and its codebase would look a lot more messy.

License

parboiled2 is released under the Apache License 2.0

Versions

Version
2.0.1
2.0.0
1.0.1
1.0.0