org.wisdom-framework:wisdom-jdbc-drivers

Integrates JDBC driver into OSGi.

License

License

GroupId

GroupId

org.wisdom-framework
ArtifactId

ArtifactId

wisdom-jdbc-drivers
Last Version

Last Version

0.5
Release Date

Release Date

Type

Type

pom
Description

Description

Integrates JDBC driver into OSGi.
Project Organization

Project Organization

Wisdom Framework

Download wisdom-jdbc-drivers

Filename Size
wisdom-jdbc-drivers-0.5.pom 861 bytes
Browse

How to add to project

<!-- https://jarcasting.com/artifacts/org.wisdom-framework/wisdom-jdbc-drivers/ -->
<dependency>
    <groupId>org.wisdom-framework</groupId>
    <artifactId>wisdom-jdbc-drivers</artifactId>
    <version>0.5</version>
    <type>pom</type>
</dependency>
// https://jarcasting.com/artifacts/org.wisdom-framework/wisdom-jdbc-drivers/
implementation 'org.wisdom-framework:wisdom-jdbc-drivers:0.5'
// https://jarcasting.com/artifacts/org.wisdom-framework/wisdom-jdbc-drivers/
implementation ("org.wisdom-framework:wisdom-jdbc-drivers:0.5")
'org.wisdom-framework:wisdom-jdbc-drivers:pom:0.5'
<dependency org="org.wisdom-framework" name="wisdom-jdbc-drivers" rev="0.5">
  <artifact name="wisdom-jdbc-drivers" type="pom" />
</dependency>
@Grapes(
@Grab(group='org.wisdom-framework', module='wisdom-jdbc-drivers', version='0.5')
)
libraryDependencies += "org.wisdom-framework" % "wisdom-jdbc-drivers" % "0.5"
[org.wisdom-framework/wisdom-jdbc-drivers "0.5"]

Dependencies

There are no dependencies for this project. It is a standalone project that does not depend on any other jars.

Project Modules

  • abstract-jdbc-driver
  • derby
  • h2
  • hsql
  • sqlite
  • postgresql
  • mysql

Wisdom-JDBC

This project integrates JDBC data sources within Wisdom-Framework. It provides two features:

  • The integration of JDBC driver in Wisdom (compatible with OSGi),
  • Letting you access to configured data sources.

Basically, for each configured data source, a javax.sql.DataSource service is published to access the data source. This service manages the connections to the data source. The org.wisdom.database.jdbc .service.DataSources service is also exposed to retrieve the list of configured data sources.

IMPORTANT: Wisdom-jdbc requires JDK 8 to be built.

Supported databases

The Wisdom-JDBC project is compatible with any implementation of the org.osgi.service.jdbc.DataSourceFactory. However finding such implementation can be tricky, so we provide implementations for:

  • Apache Derby
  • H2
  • HSQL
  • MySQL
  • PostGreSQL
  • SQLite

To integrate the JDBC driver, just add one of the following dependencies in your pom.xml file. You can obviously pick more than one if you are using several database technologies (update the version to use latest releases):

<dependency>
    <groupId>org.wisdom-framework</groupId>
    <artifactId>h2</artifactId>
    <version>1.3.172_1-SNAPSHOT</version>
</dependency>
<dependency>
    <groupId>org.wisdom-framework</groupId>
    <artifactId>derby</artifactId>
    <version>10.11.1.1_1-SNAPSHOT</version>
</dependency>
<dependency>
    <groupId>org.wisdom-framework</groupId>
    <artifactId>hsqldb</artifactId>
    <version>2.3.2_1-SNAPSHOT</version>
</dependency>
<dependency>
    <groupId>org.wisdom-framework</groupId>
    <artifactId>sqlite-jdbc</artifactId>
    <version>3.7.2_1-SNAPSHOT</version>
</dependency>
<dependency>
    <groupId>org.wisdom-framework</groupId>
    <artifactId>mysql-connector-java</artifactId>
    <version>5.1.11_1-SNAPSHOT</version>
</dependency>
<dependency>
    <groupId>org.wisdom-framework</groupId>
    <artifactId>postgresql</artifactId>
    <version>9.1-901.jdbc4_1-SNAPSHOT</version>
</dependency>

Installing and configuring the data sources

Once you have selected the JDBC driver, add the following dependency to your pom.xml file:

<dependency>
    <groupId>org.wisdom-framework</groupId>
    <artifactId>wisdom-jdbc-datasources</artifactId>
    <version>${project.version}</version>
</dependency>

<dependency>
    <groupId>org.javassist</groupId>
    <artifactId>javassist</artifactId>
    <version>3.19.0-GA</version>
</dependency>

Then, you need to edit the src/main/configuration/application.conf to configure the data sources. The configuration can differ depending of the database technology you use. Property name are formed using the following rule: db .datasource_name.key. For example the driver class for the data source 'default' is set using the db.default .driver property.

Here are some examples:

## Derby - Memory
db.derby.driver="org.apache.derby.jdbc.EmbeddedDriver"
db.derby.url="jdbc:derby:memory:sample;create=true"


## H2 - Memory
db.h2mem.driver="org.h2.Driver"
db.h2mem.url="jdbc:h2:mem:h2-mem-it"


## H2 - File
db.h2file.driver="org.h2.Driver"
db.h2file.url="jdbc:h2:./target/db/h2-it.db"


#
# Note about HSQL : HSQL supports only one catalog per database, so the `defaultCatalog` parameter must not be set.
# http://hsqldb.org/doc/2.0/apidocs/org/hsqldb/jdbc/JDBCConnection.html#setCatalog(java.lang.String)
#

## HSQL - Memory
db.hsqlmem.driver="org.hsqldb.jdbc.JDBCDriver"
db.hsqlmem.url="jdbc:hsqldb:mem:hsql-it"


## HSQL - File
db.hsqlfile.driver="org.hsqldb.jdbc.JDBCDriver"
db.hsqlfile.url="jdbc:hsqldb:target/db/hsql-it.db"


## SQLite - Memory
db.sqlite.driver="org.sqlite.JDBC"
db.sqlite.url="jdbc:sqlite:target/sqlite-it"

# SQLLite supports only SERIALIZABLE and READ_UNCOMMITTED
db.sqlite.isolation="READ_UNCOMMITTED"

##Configuration

Every property is optional, except for the "essentials" marked below.

Essentials

๐Ÿ”  driver
This is the name of the class provided by the JDBC driver. Default: none

๐Ÿ”  url
This is the JDBC url. Default: none

๐Ÿ”  user
This property sets the default authentication username. Default: none

๐Ÿ”  password
This property sets the default authentication password. Default: none

Frequently used

โœ… autoCommit
This property controls the default auto-commit behavior of connections returned from the pool. It is a boolean value. Default: true

โŒš connectionTimeout
This property controls the maximum number of milliseconds that a client (that's you) will wait for a connection from the pool. If this time is exceeded without a connection becoming available, a SQLException will be thrown. 1000ms is the minimum value. Default: 30000 (30 seconds)

โŒš idleTimeout
This property controls the maximum amount of time that a connection is allowed to sit idle in the pool. Whether a connection is retired as idle or not is subject to a maximum variation of +30 seconds, and average variation of +15 seconds. A connection will never be retired as idle before this timeout. A value of 0 means that idle connections are never removed from the pool. Default: 600000 (10 minutes)

โŒš maxLifetime
This property controls the maximum lifetime of a connection in the pool. When a connection reaches this timeout it will be retired from the pool, subject to a maximum variation of +30 seconds. An in-use connection will never be retired, only when it is closed will it then be removed. We strongly recommend setting this value, and it should be at least 30 seconds less than any database-level connection timeout. A value of 0 indicates no maximum lifetime (infinite lifetime), subject of course to the idleTimeout setting. Default: 1800000 (30 minutes)

๐Ÿ”  connectionTestQuery
If your driver supports JDBC4 we strongly recommend not setting this property. This is for "legacy" databases that do not support the JDBC4 Connection.isValid() API. This is the query that will be executed just before a connection is given to you from the pool to validate that the connection to the database is still alive. Again, try running the pool without this property, HikariCP will log an error if your driver is not JDBC4 compliant to let you know. Default: none

๐Ÿ”ข minimumIdle
This property controls the minimum number of idle connections that HikariCP tries to maintain in the pool. If the idle connections dip below this value, HikariCP will make a best effort to add additional connections quickly and efficiently. However, for maximum performance and responsiveness to spike demands, we recommend not setting this value and instead allowing HikariCP to act as a fixed size connection pool. Default: same as maximumPoolSize

๐Ÿ”ข maximumPoolSize
This property controls the maximum size that the pool is allowed to reach, including both idle and in-use connections. Basically this value will determine the maximum number of actual connections to the database backend. A reasonable value for this is best determined by your execution environment. When the pool reaches this size, and no idle connections are available, calls to getConnection() will block for up to connectionTimeout milliseconds before timing out. Default: 10

๐Ÿ”  poolName
This property represents a user-defined name for the connection pool and appears mainly in logging and JMX management consoles to identify pools and pool configurations. Default: auto-generated

Infrequently used

โœ… initializationFailFast
This property controls whether the pool will "fail fast" if the pool cannot be seeded with initial connections successfully. If you want your application to start even when the database is down/unavailable, set this property to false. Default: true

โŽ isolateInternalQueries
This property determines whether to isolates internal pool queries, such as the connection alive test, in their own transaction. Since these are typically read-only queries, it is rarely necessary to encapsulate them in their own transaction. This property only applies if autoCommit is disabled. Default: false

โŽ allowPoolSuspension
This property controls whether the pool can be suspended and resumed through JMX. This is useful for certain failover automation scenarios. When the pool is suspended, calls to getConnection() will not timeout and will be held until the pool is resumed. Default: false

โŽ readOnly
This property controls whether Connections obtained from the pool are in read-only mode by default. Note some databases do not support the concept of read-only mode, while others provide query optimizations when the Connection is set to read-only. Whether you need this property or not will depend largely on your application and database. Default: false

โŽ registerMbeans
This property controls whether or not JMX Management Beans ("MBeans") are registered or not. Default: false

๐Ÿ”  catalog
This property sets the default catalog for databases that support the concept of catalogs. If this property is not specified, the default catalog defined by the JDBC driver is used. Default: driver default

๐Ÿ”  initSQL
This property sets a SQL statement that will be executed after every new connection creation before adding it to the pool. If this SQL is not valid or throws an exception, it will be treated as a connection failure and the standard retry logic will be followed. Default: none

๐Ÿ”  isolation
This property controls the default transaction isolation level of connections returned from the pool. If this property is not specified, the default transaction isolation level defined by the JDBC driver is used. Only use this property if you have specific isolation requirements that are common for all queries. The value of this property is the constant name from the Connection class without the word TRANSACTION such as READ_COMMITTED, REPEATABLE_READ, etc. Default: driver default

โŒš validationTimeout
This property controls the maximum amount of time that a connection will be tested for aliveness. This value must be less than the connectionTimeout. The lowest accepted validation timeout is 1000ms (1 second). Default: 5000

โŒš leakDetectionThreshold
This property controls the amount of time that a connection can be out of the pool before a message is logged indicating a possible connection leak. A value of 0 means leak detection is disabled. Lowest acceptable value for enabling leak detection is 2000 (2 secs). Default: 0

Note :The configuration list has been adapted in large part from https://github.com/brettwooldridge/HikariCP.

Log SQL statements

This plugin does not offer (out of the box) a way to log SQL statements because we use HikariCP and HikariCP suggests to you use the log capacities of your database vendor. From HikariCP docs:

Log Statement Text / Slow Query Logging

Like Statement caching, most major database vendors support statement logging through properties of their own driver. This includes Oracle, MySQL, Derby, MSSQL, and others. Some even support slow query logging. We consider this a "development-time" feature. For those few databases that do not support it, jdbcdslog-exp is a good option. Great stuff during development and pre-Production.

Using the DataSources service

Once configured, the data source is exposed as a service(javax.sql.DataSource). So you can retrieve it using:

@Requires DataSource ds;

If you have several data sources configured, you can filter them using:

@Requires(filter="(datasource.name=name)") DataSource ds;

You can also use the org.wisdom.database.jdbc.service.DataSources service that let you retrieve the set of configured data sources:

@Requires DataSources sources;

//...
// Data Source name -> Data Source
Map<String, DataSource>  map = sources.getDataSources();

Integrating another database

To be compatible with the JDBC Integration, the driver must be packaged as an OSGi bundle and an implementation of org.osgi.service.jdbc.DataSourceFactory must be published in the OSGi registry. This architecture let us reduce the risk of leaks.

To ease your integration, we recommend you to extend org.wisdom.jdbc.driver.helpers.AbstractDataSourceFactory reducing the implementation difficulties.

org.wisdom-framework

Wisdom Framework

Versions

Version
0.5
0.4